2.3
Loading build...
The Seagate ST4000DM001 4TB is a 3.5" 4000GB Hard Disk Drive.
It uses the SATA 3Gb/s interface and has a speed of 5900 RPM.
| Drive Type | Hard Disk Drive | This defines whether the drive is a large-capacity slower hard disk drive, a smaller-capacity but much faster solid-state drive, or a hybrid | |
|---|---|---|---|
| Physical Size | 3.5" | The size of the drive dictates which drive bays it will fit into - generally a small drive will fit into any bigger drive bay with an adapter | |
| Capacity | 4000GB | The drive storage capacity is the limit to the size of files that can be stored | |
| Release Date | 01 Dec 2012 | The later the release, the more likely manufacturer support will still be around | |
| RPM | 5900 RPM | The higher the RPM, the faster the hard drive, and the faster stored data can be accessed | |
| Drive Interface | SATA 3Gb/s | The interface is the type of motherboard connection and defines the bandwidth limit of the drive |
The Seagate ST4000DM001 4TB is a hard disk drive, which means it stores data using quickly rotating disks, or platters, that can be read and written on via the moving actuator arm. Hard disk drives generally have a large storage capacity, and so are perfect for large amounts of data. The potential performance is well below that of solid-state drives, but they can definitely still hold their own. The Seagate ST4000DM001 4TB is a good example of a high performance hard disk drive, and should complement any PC build as a primary storage device.
At a speed of 5900 RPM, the hard disk drive spins at a below average speed. This speed is common for laptop hard drives, and may have long-term reliability and low-power benefits, but the resulting hard drive performance is noticeably slow.
With a capacity of 4000GB, the Seagate ST4000DM001 4TB has an absolutely massive amount of storage for just one hard disk drive. Using the SATA 2.0 3Gb/s interface this hard disk drive will not be limited by its connection with the motherboard, and there is currently no real reason to choose SATA 3.0 over SATA 2.0 for a mechanical hard disk drive (SSDs are another matter).
A form factor size of 3.5" is standard for desktop drives, and this will fit into any standard case drive bay, or into a 5.25" drive bay with an adapter.