The Thermaltake SMART 430W power supply has a maximum wattage output of 430W. This is a very low PSU capacity, and should only be used when powering a low power system. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.

The Thermaltake SMART 430W has an 80 Plus rating of Bronze. This means the PSU operates at average efficiency levels of at least 82%, 85%, and 82% for loads of 100%, 50%, and 20% respectively. Bronze is the fourth-best 80 Plus certificate available, and as such the Thermaltake SMART 430W is very efficient and is a decent PSU choice. The actual efficiencies for this PSU are 82.44%, 85.47%, and 82.93%, for loads of 100%, 50%, and 20%.

The dimensions of the Thermaltake SMART 430W (LxWxH) are 14cm x 15cm x 8.6cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.

The Thermaltake SMART 430W is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.

The Thermaltake SMART 430W is not designed for low volumes, meaning that its constant drone while your PC is on could potentially be noticeable and irritating, though this may only be a problem for those that require silent environments.