The LEPA MaxPlatinum P1050-MA has a maximum capacity of 1050 Watts.
It has an 80 Plus rating of Platinum, is built to be modular,, is built to be silent, and its dimensions (LxWxH) are 175cm x 150cm x 86cm.
|80 Plus Rating||1||Fan Size||1mm|
|Input Frequency Range||1||Silent||yes|
|+3.3V Output||1A||24 Pin Mobo Connector||yes|
|+5V Output||1A||4+4 Pin CPU Connector||yes|
|+12V Output||1A||8 Pin Connectors||1|
|+12V Count||1||4 Pin Connectors||1|
The LEPA MaxPlatinum P1050-MA power supply has a maximum wattage output of 1050W. This should be enough to run multiple of even the most demanding of graphics cards with SLI or Crossfire, although it is worth double-checking if purchasing a particularly power-hungry graphics card setup. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The LEPA MaxPlatinum P1050-MA has an 80 Plus rating of Platinum. This means the PSU operates at average efficiency levels of at least 89%, 92%, and 90% for loads of 100%, 50%, and 20% respectively. Platinum is the best 80 Plus certificate available, and as such the LEPA MaxPlatinum P1050-MA is exceptionally efficient and comes very highly recommended.
The dimensions of the LEPA MaxPlatinum P1050-MA (LxWxH) are 175cm x 150cm x 86cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.
The LEPA MaxPlatinum P1050-MA is modular, meaning that cables can be taken out and connected back in as necessary. This can make cable management much easier, leading to a less chaotic build, and better airflow.
The LEPA MaxPlatinum P1050-MA is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.