The ENERMAX MaxRevo EMR1350EWT 1350W has a maximum capacity of 1350 Watts.
It has an 80 Plus rating of Gold, is built to be silent,.
|Form Factor||1||Fan Size||1mm|
|80 Plus Rating||1||Modular||yes|
|Efficiency at 100%||1%||Silent||yes|
|Efficiency at 50%||1%||24 Pin Mobo Connector||yes|
|Efficiency at 20%||1%||4+4 Pin CPU Connector||yes|
|Input Voltage||1||8 Pin Connectors||1|
|Input Frequency Range||1||4 Pin Connectors||1|
|+3.3V Output||1A||SATA Connector||1|
The ENERMAX MaxRevo EMR1350EWT 1350W power supply has a maximum wattage output of 1350W. This should be enough to run multiple of even the most demanding of graphics cards with SLI or Crossfire, although it is worth double-checking if purchasing a particularly power-hungry graphics card setup. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The ENERMAX MaxRevo EMR1350EWT 1350W has an 80 Plus rating of Gold. This means the PSU operates at average efficiency levels of at least 87%, 90%, and 87% for loads of 100%, 50%, and 20% respectively. Gold is the second-best 80 Plus certificate available, and as such the ENERMAX MaxRevo EMR1350EWT 1350W is extremely efficient and comes highly recommended. The actual efficiencies for this PSU are 88.48%, 91.62%, and 90.57%, for loads of 100%, 50%, and 20%.
The ENERMAX MaxRevo EMR1350EWT 1350W is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.
The ENERMAX MaxRevo EMR1350EWT 1350W is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.