The Antec HCG-620M has a maximum capacity of 620 Watts.
It has an 80 Plus rating of Bronze, is built to be modular, and its dimensions (LxWxH) are 0cm x 150cm x 0cm.
![]() | Capacity | 1W | ![]() | +12V Count | 1 | ||
---|---|---|---|---|---|---|---|
![]() | Form Factor | 1 | ![]() | Width | 1cm | ||
![]() | 80 Plus Rating | 1 | ![]() | Fan Size | 1mm | ||
![]() | Efficiency at 100% | 1% | ![]() | Modular | yes | ||
![]() | Efficiency at 50% | 1% | ![]() | Silent | yes | ||
![]() | Efficiency at 20% | 1% | ![]() | 24 Pin Mobo Connector | yes | ||
![]() | Input Voltage | 1 | ![]() | 4+4 Pin CPU Connector | yes | ||
![]() | Input Frequency Range | 1 | ![]() | 8 Pin Connectors | 1 | ||
![]() | +3.3V Output | 1A | ![]() | 6 Pin Connectors | 1 | ||
![]() | +5V Output | 1A | ![]() | 4 Pin Connectors | 1 | ||
![]() | +12V Output | 1A | ![]() | SATA Connector | 1 |
The Antec HCG-620M power supply has a maximum wattage output of 620W. This is a decent capacity, and should be fine at handling the majority of mid-performance PC builds, but you could find yourself in trouble if you do not make certain of its capability to power any proposed build. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The Antec HCG-620M has an 80 Plus rating of Bronze. This means the PSU operates at average efficiency levels of at least 82%, 85%, and 82% for loads of 100%, 50%, and 20% respectively. Bronze is the fourth-best 80 Plus certificate available, and as such the Antec HCG-620M is very efficient and is a decent PSU choice. The actual efficiencies for this PSU are 82.90%, 86.38%, and 85.28%, for loads of 100%, 50%, and 20%.
The dimensions of the Antec HCG-620M (LxWxH) are 0cm x 150cm x 0cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.
The Antec HCG-620M is modular, meaning that cables can be taken out and connected back in as necessary. This can make cable management much easier, leading to a less chaotic build, and better airflow.
The Antec HCG-620M is not designed for low volumes, meaning that its constant drone while your PC is on could potentially be noticeable and irritating, though this may only be a problem for those that require silent environments.