Loading build...
Loading...
Your Shops

J&W

J&W JW-P43S-FUSION

The J&W JW-P43S-FUSION is compatible with Intel processors with the LGA 775/ Socket T socket.

It has 8 GB DDR3, 4 GB DDR2 maximum RAM and conforms to the ATX form factor standard.

4.2

J&W JW-P43S-FUSION

help iconCPU SocketLGA 775/ Socket Thelp iconSLI Support1 graphics cards
help iconCPU Compatible MakeIntelhelp iconCrossfire Support4 graphics cards
help iconCPU ChipsetIntel P43 + ICH10help iconOnboard GPUno
help iconForm FactorATXhelp iconPCI Slots
  • 2 x PCIe x1 v2.0
  • 1 x PCIe x4 v2.0
  • 1 x PCIe x16 v2.0
help iconMax RAM8 GB DDR3
4 GB DDR2
help iconSATA 1.00
help iconRAM Slots2 x DDR3
2 x DDR2
help iconSATA 2.06
help iconMemory Channels2help iconSATA 3.00
help iconCompatible RAM Speeds
  • DDR2 667 MHz
  • DDR2 800 MHz
  • DDR3 1066 MHz
  • DDR3 1333 MHz
  • DDR3 1600 MHz
help iconRAID Supportno
help iconUSB 2.0 Internal Slots3help iconInternal I/O
  • 1 x 24 pin power connector
  • 1 x 8 pin power connector
  • 2 x fan header
  • 1 x S/PDIF connector
  • 1 x IDE connector
  • System Panel Connection
  • TPM Chip
help iconUSB 2.0 Rear6help iconBack Panel I/O
  • D-Sub Connector
  • DVI connector"
  • Display Port">Display Port
  • Line In Connector
  • Line Out Connector
  • Mic In connector
  • 7.1 Surround Sound
  • Audio Input Output
  • PS/2 keyboard connector
  • PS/2 mouse connector
  • 1 x eSATA
help iconGraphics Card InterfaceNot sure

J&W JW-P43S-FUSION compatibility review

The J&W JW-P43S-FUSION uses the Intel LGA 775/ Socket T CPU socket. Any compatible Intel CPU will have the same socket entry. It uses the DDR3 memory type, with maximum speeds of up to 1600 MHz, and 2 DDR3 slots allowing for a maximum total of 8 GB RAM.

Conforming to the ATX standard, the J&W JW-P43S-FUSION should fit into the majority of cases. ATX is the most common form factor, and as such has a high degree of compatibility with other components while providing a decent number of slots to widen your expansion options.

The J&W JW-P43S-FUSION has 6 SATA 2.0 hard drive slots. These allow for data speeds of up to 3GB/s. SATA 2.0 is a very common standard, and despite the emergence of SATA 3.0 - whose potential is difficult to reach currently - SATA 2.0 remains a viable option.

The J&W JW-P43S-FUSION does not support onboard graphics. Any system build that uses this motherboard therefore requires a separate graphics card, or a processor that has a GPU on the same die, such as AMD APU processors. There are 1 PCIe x16 slots on this motherboard. This means it is perfectly capable of accommodating the latest graphics cards, although it is important to try and use a graphics card with the same graphics card interface of Not sure, as anything below will not reach the motherboard's potential, and anything above will have its performance slashed to the bandwidth maximum of the J&W JW-P43S-FUSION's Not sure. The J&W JW-P43S-FUSION supports up to 4 AMD Crossfire connected graphics cards for improved overall graphical performance at the cost of multiplied graphics-based power consumption as well as the price of the cards themselves. Nvidia SLI is not supported.

The J&W JW-P43S-FUSION has 9 USB 2.0 slots but no USB 3.0 slots. While USB 3.0 slots are so far by no means necessary, and with a plethora of USB 2.0 peripherals to choose from, the USB functionality on this motherboard should be fine. If planning on building a new system, a motherboard with USB 3.0 is likely to have a longer life cycle, however.

Merchant Comparison
Merchant Price
- -
Custom PC Builder Auto PC Builder Compare Mobo All Motherboard list
Best Compatible Hardware by Price
Type :
$ $

Similar Motherboards to J&W JW-P43S-FUSION