This Komputerbay RAM has 8GB DDR2 memory clocked at a speed of 667MHz.
It is made up of 4 sticks.
|Total Memory||8GB||The amount of memory is the RAM's primary feature and defines how much data it can store for temporary fast access|
|Total Speed||667MHz||Speed defines how many data transfers can be made per second.|
|Stick Count||4||The number of sticks define the number of slots in the motherboard necessary to house the RAM|
|RAM Type||DDR2||The RAM type defines compatibility with motherboards, as well as the limits to performance|
|Timings||CL 5||Timings show latency, row address to column address delay, row precharge time, and row active time|
Rather than storing data permanently like in large capacity hard drives, RAM provides a temporary cache that your system uses to store the data that you are currently using. This makes accessing the most relevant data much faster, because accessing RAM requires much less time than your hard drive. In fact, most systems are configured to use the hard drive as a substitute for RAM when the RAM is being overloaded with data. This can bring your PC to a crawl, however, and is why having enough RAM is crucial.
DDR2 RAM is now an old technology, with limits far below that of DDR4 and DDR3. Due to the prevalence of DDR3, DDR2 RAM is actually not particularly cheap or good value, and any new RAM is recommended to be DDR4 or DDR3 over DDR2.
With a total memory of 8GB, the Komputerbay 8GB (4x 2GB) DDR2 PC2-5300F 667MHz CL5 ECC Fully Buffered 2Rx4 FB-DIMM (240 PIN) w/ Heatspreaders has the capacity to help run a large array of applications simultaneously, or a medium sized server. It should be more than enough for any gaming or general PC usage requirements. This Komputerbay DDR2 RAM has a speed of 667MHz. RAM speed is not a crucial feature, but it does contribute significantly to PC games and certain applications like video-editing software. 667MHz is quite a poor speed, so would negatively impact the performance of both of these.
The CL RAM timing, or CAS latency, for this RAM is 5. This is the time it takes to send a column address and get a response. Generally speaking, the lower the latency the better, but there are other contributing factors such as clock speed.