Loading build...
Loading...
Your Shops

SilverStone

SilverStone Strider Plus ST1000-P 1000W

The SilverStone Strider Plus ST1000-P 1000W has a maximum capacity of 1000 Watts.

It has an 80 Plus rating of Silver and its dimensions (LxWxH) are 16cm x 15cm x 8.6cm.

7.8

SilverStone Strider Plus ST1000-P 1000W

help iconCapacity1000Whelp iconLength16cm
help iconForm FactorATX12V, EPS12V & PS2help iconWidth15cm
help icon80 Plus RatingSilverhelp iconHeight8.6cm
help iconEfficiency at 100%86.54%help iconFan Size135mm
help iconEfficiency at 50%89.24%help iconModularno
help iconEfficiency at 20%86.52%help iconSilentno
help iconInput Voltage90V - 260Vhelp icon24 Pin Mobo Connectoryes
help iconInput Frequency Range47Hz - 63Hzhelp icon4+4 Pin CPU Connectoryes
help icon+3.3V Output30Ahelp icon6 Pin Connectors2
help icon+5V Output30Ahelp iconSATA Connector6
help icon+12V Output80A

SilverStone Strider Plus ST1000-P 1000W compatibility review

The SilverStone Strider Plus ST1000-P 1000W power supply has a maximum wattage output of 1000W. This should be enough to run multiple of even the most demanding of graphics cards with SLI or Crossfire, although it is worth double-checking if purchasing a particularly power-hungry graphics card setup. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.

The SilverStone Strider Plus ST1000-P 1000W has an 80 Plus rating of Silver. This means the PSU operates at average efficiency levels of at least 85%, 88%, and 85% for loads of 100%, 50%, and 20% respectively. Silver is the third-best 80 Plus certificate available, and as such the SilverStone Strider Plus ST1000-P 1000W is considerably efficient and is recommended. The actual efficiencies for this PSU are 86.54%, 89.24%, and 86.52%, for loads of 100%, 50%, and 20%.

The dimensions of the SilverStone Strider Plus ST1000-P 1000W (LxWxH) are 16cm x 15cm x 8.6cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.

The SilverStone Strider Plus ST1000-P 1000W is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.

The SilverStone Strider Plus ST1000-P 1000W is not designed for low volumes, meaning that its constant drone while your PC is on could potentially be noticeable and irritating, though this may only be a problem for those that require silent environments.

Merchant Comparison
Merchant Price
- -
Custom PC Builder Auto PC Builder Compare PSU All Power Supply list
Best Compatible Hardware by Price
Type :
$ $

Similar PSUs to SilverStone Strider Plus ST1000-P 1000W