The SilverStone ST65F-PT 650W has a maximum capacity of 0 Watts.
It has an 80 Plus rating of Platinum, is built to be modular,, is built to be silent, and its dimensions (LxWxH) are 14cm x 15cm x 8.6cm.
|80 Plus Rating||Platinum||Width||15cm|
|Efficiency at 100%||90.27%||Height||8.6cm|
|Efficiency at 50%||92.64%||Fan Size||120mm|
|Efficiency at 20%||92.03%||Modular||yes|
|Input Voltage||90V - 264V||24 Pin Mobo Connector||yes|
|Input Frequency Range||47Hz - 63Hz||4+4 Pin CPU Connector||yes|
|+3.3V Output||22A||8 Pin Connectors||5|
|+5V Output||22A||4 Pin Connectors||8|
|+12V Output||54A||SATA Connector||8|
Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The SilverStone ST65F-PT 650W has an 80 Plus rating of Platinum. This means the PSU operates at average efficiency levels of at least 89%, 92%, and 90% for loads of 100%, 50%, and 20% respectively. Platinum is the best 80 Plus certificate available, and as such the SilverStone ST65F-PT 650W is exceptionally efficient and comes very highly recommended. The actual efficiencies for this PSU are 90.27%, 92.64%, and 92.03%, for loads of 100%, 50%, and 20%.
The dimensions of the SilverStone ST65F-PT 650W (LxWxH) are 14cm x 15cm x 8.6cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.
The SilverStone ST65F-PT 650W is modular, meaning that cables can be taken out and connected back in as necessary. This can make cable management much easier, leading to a less chaotic build, and better airflow.
The SilverStone ST65F-PT 650W is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.