The SilverStone SST-ST45SF has a maximum capacity of 450 Watts.
It has an 80 Plus rating of Bronze, is built to be silent, and its dimensions (LxWxH) are 10cm x 12.5cm x 6.4cm.
|80 Plus Rating||Bronze||Fan Size||80mm|
|Input Voltage||90V - 265V||Silent||yes|
|Input Frequency Range||47Hz - 63Hz||24 Pin Mobo Connector||yes|
|+3.3V Output||21A||4+4 Pin CPU Connector||yes|
|+5V Output||22A||8 Pin Connectors||1|
|+12V Output||1A||6 Pin Connectors||1|
|+12V Count||1||4 Pin Connectors||2|
The SilverStone SST-ST45SF power supply has a maximum wattage output of 450W. This is a very low PSU capacity, and should only be used when powering a low power system. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The SilverStone SST-ST45SF has an 80 Plus rating of Bronze. This means the PSU operates at average efficiency levels of at least 82%, 85%, and 82% for loads of 100%, 50%, and 20% respectively. Bronze is the fourth-best 80 Plus certificate available, and as such the SilverStone SST-ST45SF is very efficient and is a decent PSU choice.
The dimensions of the SilverStone SST-ST45SF (LxWxH) are 10cm x 12.5cm x 6.4cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.
The SilverStone SST-ST45SF is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.
The SilverStone SST-ST45SF is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.