Loading build...
Loading...
Your Shops

Sentey

Sentey SDP650-SS

The Sentey SDP650-SS has a maximum capacity of 650 Watts.

It has an 80 Plus rating of Standard, is built to be silent, and its dimensions (LxWxH) are 18cm x 15cm x 8.6cm.

8

Sentey SDP650-SS

help iconCapacity650Whelp iconLength18cm
help iconForm FactorATX12V & EPS12Vhelp iconWidth15cm
help icon80 Plus RatingStandardhelp iconHeight8.6cm
help iconEfficiency at 100%82.54%help iconFan Size140mm
help iconEfficiency at 50%84.74%help iconModularno
help iconEfficiency at 20%81.23%help iconSilentyes
help iconInput Voltage115V - 240Vhelp icon24 Pin Mobo Connectoryes
help iconInput Frequency Range50Hz - 60Hzhelp icon4+4 Pin CPU Connectoryes
help icon+3.3V Output24Ahelp icon8 Pin Connectors1
help icon+5V Output22Ahelp icon6 Pin Connectors1
help icon+12V Output54Ahelp icon4 Pin Connectors5
help icon+12V Count1help iconSATA Connector6

Sentey SDP650-SS compatibility review

The Sentey SDP650-SS power supply has a maximum wattage output of 650W. This is a decent capacity, and should be fine at handling the majority of mid-performance PC builds, but you could find yourself in trouble if you do not make certain of its capability to power any proposed build. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.

The Sentey SDP650-SS has an 80 Plus rating of Standard. This means the PSU operates at average efficiency levels of at least 80% for loads of 100%, 50%, and 20%. Standard is the lowest 80 Plus certificate available, but with 80% load efficiency minimums, the Sentey SDP650-SS is still reliably efficient and is by no means a bad PSU choice. The actual efficiencies for this PSU are 82.54%, 84.74%, and 81.23%, for loads of 100%, 50%, and 20%.

The dimensions of the Sentey SDP650-SS (LxWxH) are 18cm x 15cm x 8.6cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.

The Sentey SDP650-SS is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.

The Sentey SDP650-SS is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.

Merchant Comparison
Merchant Price
amazon $0.00
Custom PC Builder Auto PC Builder Compare PSU All Power Supply list
Best Compatible Hardware by Price
Type :
$ $

Similar PSUs to Sentey SDP650-SS