The Sentey ER600-SM has a maximum capacity of 600 Watts.
Its dimensions (LxWxH) are 16.5cm x 15cm x 8.6cm.
|Input Voltage||115V - 230V||Modular||yes|
|Input Frequency Range||50Hz - 60Hz||Silent||yes|
|+3.3V Output||24A||24 Pin Mobo Connector||yes|
|+5V Output||32A||4+4 Pin CPU Connector||yes|
|+12V Output||38A||8 Pin Connectors||1|
|+12V Count||2||6 Pin Connectors||1|
|Length||16.5cm||4 Pin Connectors||4|
The Sentey ER600-SM power supply has a maximum wattage output of 600W. This is a decent capacity, and should be fine at handling the majority of mid-performance PC builds, but you could find yourself in trouble if you do not make certain of its capability to power any proposed build. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The Sentey ER600-SM does not appear to have an 80 Plus certificate, so make sure it is as effective as you need it to be if using it in a build.
The dimensions of the Sentey ER600-SM (LxWxH) are 16.5cm x 15cm x 8.6cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.
The Sentey ER600-SM is modular, meaning that cables can be taken out and connected back in as necessary. This can make cable management much easier, leading to a less chaotic build, and better airflow.
The Sentey ER600-SM is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.