Loading build...
Your Shops


SEED V12 BS400 400W

The SEED V12 BS400 400W has a maximum capacity of 400 Watts.

It has an 80 Plus rating of Bronze, is built to be silent, and its dimensions (LxWxH) are 15cm x 14cm x 8.6cm.


SEED V12 BS400 400W

help iconCapacity400Whelp icon+12V Count2
help iconForm FactorATX12Vhelp iconLength15cm
help icon80 Plus RatingBronzehelp iconWidth14cm
help iconEfficiency at 100%83.92%help iconHeight8.6cm
help iconEfficiency at 50%85.89%help iconFan Size120mm
help iconEfficiency at 20%82.65%help iconModularno
help iconLocalizationTaiwanhelp iconSilentyes
help iconInput Voltage100V - 240Vhelp icon24 Pin Mobo Connectoryes
help iconInput Frequency Range50Hz - 60Hzhelp icon4+4 Pin CPU Connectoryes
help icon+3.3V Output18Ahelp icon8 Pin Connectors1
help icon+5V Output18Ahelp icon4 Pin Connectors1
help icon+12V Output32Ahelp iconSATA Connector2

SEED V12 BS400 400W compatibility review

The SEED V12 BS400 400W power supply has a maximum wattage output of 400W. This is a very low PSU capacity, and should only be used when powering a low power system. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.

The SEED V12 BS400 400W has an 80 Plus rating of Bronze. This means the PSU operates at average efficiency levels of at least 82%, 85%, and 82% for loads of 100%, 50%, and 20% respectively. Bronze is the fourth-best 80 Plus certificate available, and as such the SEED V12 BS400 400W is very efficient and is a decent PSU choice. The actual efficiencies for this PSU are 83.92%, 85.89%, and 82.65%, for loads of 100%, 50%, and 20%.

The dimensions of the SEED V12 BS400 400W (LxWxH) are 15cm x 14cm x 8.6cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.

The SEED V12 BS400 400W is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.

The SEED V12 BS400 400W is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.

Merchant Comparison
Merchant Price
- -
Custom PC Builder Auto PC Builder Compare PSU All Power Supply list
Best Compatible Hardware by Price
Type :
$ $

Similar PSUs to SEED V12 BS400 400W