The Recom PE-M600 has a maximum capacity of 600 Watts.
It has an 80 Plus rating of Bronze, is built to be modular,, is built to be silent, and its dimensions (LxWxH) are 8.6cm x 16cm x 15cm.
|Release Date||12 Jan 2008||Fan Size||120mm|
|Form Factor||ATX12V & EPS12V||Modular||yes|
|80 Plus Rating||Bronze||Silent||yes|
|Localization||Netherlands||24 Pin Mobo Connector||yes|
|+3.3V Output||25A||4+4 Pin CPU Connector||yes|
|+5V Output||25A||8 Pin Connectors||2|
|+12V Output||22A||6 Pin Connectors||1|
|+12V Count||2||4 Pin Connectors||5|
The Recom PE-M600 power supply has a maximum wattage output of 600W. This is a decent capacity, and should be fine at handling the majority of mid-performance PC builds, but you could find yourself in trouble if you do not make certain of its capability to power any proposed build. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The Recom PE-M600 has an 80 Plus rating of Bronze. This means the PSU operates at average efficiency levels of at least 82%, 85%, and 82% for loads of 100%, 50%, and 20% respectively. Bronze is the fourth-best 80 Plus certificate available, and as such the Recom PE-M600 is very efficient and is a decent PSU choice.
The dimensions of the Recom PE-M600 (LxWxH) are 8.6cm x 16cm x 15cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.
The Recom PE-M600 is modular, meaning that cables can be taken out and connected back in as necessary. This can make cable management much easier, leading to a less chaotic build, and better airflow.
The Recom PE-M600 is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.