The Rasurbo BP-XII450 has a maximum capacity of 450 Watts.
It has an 80 Plus rating of Not sure and its dimensions (LxWxH) are 150cm x 140cm x 85cm.
|Release Date||06 Apr 2012||Width||140cm|
|80 Plus Rating||Not sure||Fan Size||120mm|
|Input Frequency Range||50Hz - 60Hz||Silent||no|
|+3.3V Output||25A||24 Pin Mobo Connector||yes|
|+5V Output||26A||4+4 Pin CPU Connector||yes|
|+12V Output||15A||4 Pin Connectors||1|
|+12V Count||2||SATA Connector||2|
The Rasurbo BP-XII450 power supply has a maximum wattage output of 450W. This is a very low PSU capacity, and should only be used when powering a low power system. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The Rasurbo BP-XII450 has an 80 Plus rating of Not sure. This means the PSU operates at average efficiency levels of at least
The dimensions of the Rasurbo BP-XII450 (LxWxH) are 150cm x 140cm x 85cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.
The Rasurbo BP-XII450 is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.
The Rasurbo BP-XII450 is not designed for low volumes, meaning that its constant drone while your PC is on could potentially be noticeable and irritating, though this may only be a problem for those that require silent environments.