The RAIDMax RX-600F 600W has a maximum capacity of 600 Watts.
It has an 80 Plus rating of Bronze.
|Form Factor||ATX12V||Fan Size||120mm|
|80 Plus Rating||Bronze||Modular||no|
|Efficiency at 100%||82.55%||Silent||no|
|Efficiency at 50%||87.43%||24 Pin Mobo Connector||yes|
|Efficiency at 20%||87.13%||4+4 Pin CPU Connector||yes|
|Input Voltage||100V - 240V||6 Pin Connectors||2|
|+3.3V Output||30A||4 Pin Connectors||4|
|+5V Output||36A||SATA Connector||6|
The RAIDMax RX-600F 600W power supply has a maximum wattage output of 600W. This is a decent capacity, and should be fine at handling the majority of mid-performance PC builds, but you could find yourself in trouble if you do not make certain of its capability to power any proposed build. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The RAIDMax RX-600F 600W has an 80 Plus rating of Bronze. This means the PSU operates at average efficiency levels of at least 82%, 85%, and 82% for loads of 100%, 50%, and 20% respectively. Bronze is the fourth-best 80 Plus certificate available, and as such the RAIDMax RX-600F 600W is very efficient and is a decent PSU choice. The actual efficiencies for this PSU are 82.55%, 87.43%, and 87.13%, for loads of 100%, 50%, and 20%.
The RAIDMax RX-600F 600W is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.
The RAIDMax RX-600F 600W is not designed for low volumes, meaning that its constant drone while your PC is on could potentially be noticeable and irritating, though this may only be a problem for those that require silent environments.