The PC Power and Cooling Silencer Mk II 950W PPCMK2S950 has a maximum capacity of 950 Watts.
It has an 80 Plus rating of Silver.
|Form Factor||ATX12V||+12V Count||1|
|80 Plus Rating||Silver||Modular||no|
|Input Voltage||100V - 240V||24 Pin Mobo Connector||yes|
|Input Frequency Range||50Hz - 60Hz||4+4 Pin CPU Connector||yes|
|+3.3V Output||25A||8 Pin Connectors||3|
|+5V Output||25A||6 Pin Connectors||3|
The PC Power and Cooling Silencer Mk II 950W PPCMK2S950 power supply has a maximum wattage output of 950W. This should run most PC builds with ease, but might not be enough for power hungry graphics card setups such as SLI or Crossfire combinations. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The PC Power and Cooling Silencer Mk II 950W PPCMK2S950 has an 80 Plus rating of Silver. This means the PSU operates at average efficiency levels of at least 85%, 88%, and 85% for loads of 100%, 50%, and 20% respectively. Silver is the third-best 80 Plus certificate available, and as such the PC Power and Cooling Silencer Mk II 950W PPCMK2S950 is considerably efficient and is recommended.
The PC Power and Cooling Silencer Mk II 950W PPCMK2S950 is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.
The PC Power and Cooling Silencer Mk II 950W PPCMK2S950 is not designed for low volumes, meaning that its constant drone while your PC is on could potentially be noticeable and irritating, though this may only be a problem for those that require silent environments.