The Nox Urano TX 1050 has a maximum capacity of 1050 Watts.
Its dimensions (LxWxH) are 16cm x 15cm x 8.6cm.
|Input Voltage||115V - 230V||Fan Size||140mm|
|Input Frequency Range||50Hz - 60Hz||Modular||no|
|+5V Output||30A||24 Pin Mobo Connector||yes|
|+12V Output||87A||4+4 Pin CPU Connector||yes|
|+12V Count||2||8 Pin Connectors||6|
|Length||16cm||4 Pin Connectors||4|
The Nox Urano TX 1050 power supply has a maximum wattage output of 1050W. This should be enough to run multiple of even the most demanding of graphics cards with SLI or Crossfire, although it is worth double-checking if purchasing a particularly power-hungry graphics card setup. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The Nox Urano TX 1050 does not appear to have an 80 Plus certificate, so make sure it is as effective as you need it to be if using it in a build.
The dimensions of the Nox Urano TX 1050 (LxWxH) are 16cm x 15cm x 8.6cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.
The Nox Urano TX 1050 is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.
The Nox Urano TX 1050 is not designed for low volumes, meaning that its constant drone while your PC is on could potentially be noticeable and irritating, though this may only be a problem for those that require silent environments.