The MS-Tech V-GO A5.2 520W has a maximum capacity of 520 Watts.
It has an 80 Plus rating of Standard, is built to be modular,, is built to be silent,.
|Form Factor||ATX12V, EPS12V & PS2||Modular||yes|
|80 Plus Rating||Standard||Silent||yes|
|Efficiency at 100%||82.11%||24 Pin Mobo Connector||yes|
|Efficiency at 50%||84.11%||4+4 Pin CPU Connector||yes|
|Efficiency at 20%||80.26%||8 Pin Connectors||2|
The MS-Tech V-GO A5.2 520W power supply has a maximum wattage output of 520W. This is a mid-range capacity, and should be fine as long as it is part of an equally mid-range system build. Always make sure that a purchased PSU is capable of powering your system. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The MS-Tech V-GO A5.2 520W has an 80 Plus rating of Standard. This means the PSU operates at average efficiency levels of at least 80% for loads of 100%, 50%, and 20%. Standard is the lowest 80 Plus certificate available, but with 80% load efficiency minimums, the MS-Tech V-GO A5.2 520W is still reliably efficient and is by no means a bad PSU choice. The actual efficiencies for this PSU are 82.11%, 84.11%, and 80.26%, for loads of 100%, 50%, and 20%.
The MS-Tech V-GO A5.2 520W is modular, meaning that cables can be taken out and connected back in as necessary. This can make cable management much easier, leading to a less chaotic build, and better airflow.
The MS-Tech V-GO A5.2 520W is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.