The MK-650W has a maximum capacity of 650 Watts.
It has an 80 Plus rating of Not sure and its dimensions (LxWxH) are 163cm x 150cm x 86cm.
|80 Plus Rating||Not sure||Silent||no|
|Localization||United States||24 Pin Mobo Connector||yes|
|+3.3V Output||24A||4+4 Pin CPU Connector||yes|
|+5V Output||32A||8 Pin Connectors||2|
|+12V Output||22A||6 Pin Connectors||2|
|Length||163cm||4 Pin Connectors||6|
The MK-650W power supply has a maximum wattage output of 650W. This is a decent capacity, and should be fine at handling the majority of mid-performance PC builds, but you could find yourself in trouble if you do not make certain of its capability to power any proposed build. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The MK-650W has an 80 Plus rating of Not sure. This means the PSU operates at average efficiency levels of at least
The dimensions of the MK-650W (LxWxH) are 163cm x 150cm x 86cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.
The MK-650W is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.
The MK-650W is not designed for low volumes, meaning that its constant drone while your PC is on could potentially be noticeable and irritating, though this may only be a problem for those that require silent environments.