The High Power EP-600 BR-II 600W has a maximum capacity of 600 Watts.
It has an 80 Plus rating of Bronze, is built to be silent, and its dimensions (LxWxH) are 14cm x 15cm x 8.6cm.
|Release Date||31 Jan 2010||Length||14cm|
|Form Factor||Not sure||Width||15cm|
|80 Plus Rating||Bronze||Height||8.6cm|
|Efficiency at 100%||84.02%||Fan Size||120mm|
|Efficiency at 50%||86.34%||Modular||no|
|Efficiency at 20%||83.44%||Silent||yes|
|Localization||Taiwan||24 Pin Mobo Connector||yes|
|Input Voltage||220V - 230V||4+4 Pin CPU Connector||yes|
|Input Frequency Range||50Hz - 60Hz||8 Pin Connectors||2|
|+3.3V Output||22A||6 Pin Connectors||2|
|+5V Output||22A||4 Pin Connectors||3|
|+12V Output||45A||SATA Connector||6|
The High Power EP-600 BR-II 600W power supply has a maximum wattage output of 600W. This is a decent capacity, and should be fine at handling the majority of mid-performance PC builds, but you could find yourself in trouble if you do not make certain of its capability to power any proposed build. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The High Power EP-600 BR-II 600W has an 80 Plus rating of Bronze. This means the PSU operates at average efficiency levels of at least 82%, 85%, and 82% for loads of 100%, 50%, and 20% respectively. Bronze is the fourth-best 80 Plus certificate available, and as such the High Power EP-600 BR-II 600W is very efficient and is a decent PSU choice. The actual efficiencies for this PSU are 84.02%, 86.34%, and 83.44%, for loads of 100%, 50%, and 20%.
The dimensions of the High Power EP-600 BR-II 600W (LxWxH) are 14cm x 15cm x 8.6cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.
The High Power EP-600 BR-II 600W is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.
The High Power EP-600 BR-II 600W is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.