Loading build...
Loading...
Your Shops

High Power

High Power EP-400 BR 400W

The High Power EP-400 BR 400W has a maximum capacity of 400 Watts.

It has an 80 Plus rating of Bronze and its dimensions (LxWxH) are 14cm x 15cm x 8.6cm.

8.3

High Power EP-400 BR 400W

help iconCapacity400Whelp iconLength14cm
help iconForm FactorATX12Vhelp iconWidth15cm
help icon80 Plus RatingBronzehelp iconHeight8.6cm
help iconEfficiency at 100%80.75%help iconFan Size120mm
help iconEfficiency at 50%83.82%help iconModularno
help iconEfficiency at 20%80.86%help iconSilentno
help iconInput Voltage220V - 230Vhelp icon24 Pin Mobo Connectoryes
help iconInput Frequency Range50Hz - 60Hzhelp icon4+4 Pin CPU Connectoryes
help icon+3.3V Output20Ahelp icon6 Pin Connectors1
help icon+5V Output24Ahelp icon4 Pin Connectors1
help icon+12V Output18Ahelp iconSATA Connector3
help icon+12V Count2

High Power EP-400 BR 400W compatibility review

The High Power EP-400 BR 400W power supply has a maximum wattage output of 400W. This is a very low PSU capacity, and should only be used when powering a low power system. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.

The High Power EP-400 BR 400W has an 80 Plus rating of Bronze. This means the PSU operates at average efficiency levels of at least 82%, 85%, and 82% for loads of 100%, 50%, and 20% respectively. Bronze is the fourth-best 80 Plus certificate available, and as such the High Power EP-400 BR 400W is very efficient and is a decent PSU choice. The actual efficiencies for this PSU are 80.75%, 83.82%, and 80.86%, for loads of 100%, 50%, and 20%.

The dimensions of the High Power EP-400 BR 400W (LxWxH) are 14cm x 15cm x 8.6cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.

The High Power EP-400 BR 400W is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.

The High Power EP-400 BR 400W is not designed for low volumes, meaning that its constant drone while your PC is on could potentially be noticeable and irritating, though this may only be a problem for those that require silent environments.

Merchant Comparison
Merchant Price
- -
Custom PC Builder Auto PC Builder Compare PSU All Power Supply list
Best Compatible Hardware by Price
Type :
$ $

Similar PSUs to High Power EP-400 BR 400W