Loading build...
Your Shops



The Enermax MAXPRO EMP600AGT has a maximum capacity of 600 Watts.

It has an 80 Plus rating of Standard and its dimensions (LxWxH) are 14cm x 15cm x 8.6cm.



help iconCapacity600Whelp iconWidth15cm
help iconForm FactorATX12Vhelp iconHeight8.6cm
help icon80 Plus RatingStandardhelp iconModularno
help iconEfficiency at 100%83.86%help iconSilentno
help iconEfficiency at 50%87.59%help icon24 Pin Mobo Connectoryes
help iconEfficiency at 20%86.95%help icon4+4 Pin CPU Connectoryes
help icon+3.3V Output20Ahelp icon8 Pin Connectors2
help icon+5V Output20Ahelp icon4 Pin Connectors1
help icon+12V Output46Ahelp iconSATA Connector6
help iconLength14cm

Enermax MAXPRO EMP600AGT compatibility review

The Enermax MAXPRO EMP600AGT power supply has a maximum wattage output of 600W. This is a decent capacity, and should be fine at handling the majority of mid-performance PC builds, but you could find yourself in trouble if you do not make certain of its capability to power any proposed build. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.

The Enermax MAXPRO EMP600AGT has an 80 Plus rating of Standard. This means the PSU operates at average efficiency levels of at least 80% for loads of 100%, 50%, and 20%. Standard is the lowest 80 Plus certificate available, but with 80% load efficiency minimums, the Enermax MAXPRO EMP600AGT is still reliably efficient and is by no means a bad PSU choice. The actual efficiencies for this PSU are 83.86%, 87.59%, and 86.95%, for loads of 100%, 50%, and 20%.

The dimensions of the Enermax MAXPRO EMP600AGT (LxWxH) are 14cm x 15cm x 8.6cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.

The Enermax MAXPRO EMP600AGT is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.

The Enermax MAXPRO EMP600AGT is not designed for low volumes, meaning that its constant drone while your PC is on could potentially be noticeable and irritating, though this may only be a problem for those that require silent environments.

Merchant Comparison
Merchant Price
- -
Custom PC Builder Auto PC Builder Compare PSU All Power Supply list
Best Compatible Hardware by Price
Type :
$ $

Similar PSUs to ENERMAX Enermax MAXPRO EMP600AGT