Loading build...
Your Shops



The ENERMAX Pro82 EPR525AWT II-00 has a maximum capacity of 525 Watts.

It has an 80 Plus rating of Bronze, is built to be silent, and its dimensions (LxWxH) are 15cm x 15cm x 8.6cm.



help iconCapacity525Whelp iconLength15cm
help iconForm FactorATX12Vhelp iconWidth15cm
help icon80 Plus RatingBronzehelp iconHeight8.6cm
help iconEfficiency at 100%82.19%help iconFan Size120mm
help iconEfficiency at 50%85.37%help iconModularno
help iconEfficiency at 20%82.87%help iconSilentyes
help iconInput Voltage100V - 240Vhelp icon24 Pin Mobo Connectoryes
help iconInput Frequency Range50Hz - 60Hzhelp icon4+4 Pin CPU Connectoryes
help icon+3.3V Output24Ahelp icon8 Pin Connectors3
help icon+5V Output24Ahelp icon4 Pin Connectors6
help icon+12V Output40Ahelp iconSATA Connector7
help icon+12V Count3

ENERMAX Pro82 EPR525AWT II-00 compatibility review

The ENERMAX Pro82 EPR525AWT II-00 power supply has a maximum wattage output of 525W. This is a mid-range capacity, and should be fine as long as it is part of an equally mid-range system build. Always make sure that a purchased PSU is capable of powering your system. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.

The ENERMAX Pro82 EPR525AWT II-00 has an 80 Plus rating of Bronze. This means the PSU operates at average efficiency levels of at least 82%, 85%, and 82% for loads of 100%, 50%, and 20% respectively. Bronze is the fourth-best 80 Plus certificate available, and as such the ENERMAX Pro82 EPR525AWT II-00 is very efficient and is a decent PSU choice. The actual efficiencies for this PSU are 82.19%, 85.37%, and 82.87%, for loads of 100%, 50%, and 20%.

The dimensions of the ENERMAX Pro82 EPR525AWT II-00 (LxWxH) are 15cm x 15cm x 8.6cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.

The ENERMAX Pro82 EPR525AWT II-00 is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.

The ENERMAX Pro82 EPR525AWT II-00 is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.

Merchant Comparison
Merchant Price
- -
Custom PC Builder Auto PC Builder Compare PSU All Power Supply list
Best Compatible Hardware by Price
Type :
$ $

Similar PSUs to ENERMAX Pro82 EPR525AWT II-00