The Dynex DX-520WPS 520W has a maximum capacity of 520 Watts.
It has an 80 Plus rating of Not sure, is built to be silent, and its dimensions (LxWxH) are 15cm x 15.9cm x 8.6cm.
|80 Plus Rating||Not sure||Silent||yes|
|Localization||United States||24 Pin Mobo Connector||yes|
|+12V Count||6||4+4 Pin CPU Connector||yes|
|Length||15cm||6 Pin Connectors||2|
|Width||15.9cm||4 Pin Connectors||4|
The Dynex DX-520WPS 520W power supply has a maximum wattage output of 520W. This is a mid-range capacity, and should be fine as long as it is part of an equally mid-range system build. Always make sure that a purchased PSU is capable of powering your system. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The Dynex DX-520WPS 520W has an 80 Plus rating of Not sure. This means the PSU operates at average efficiency levels of at least
The dimensions of the Dynex DX-520WPS 520W (LxWxH) are 15cm x 15.9cm x 8.6cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.
The Dynex DX-520WPS 520W is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.
The Dynex DX-520WPS 520W is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.