The Diablotek PHD Series PHD450 450W has a maximum capacity of 450 Watts.
|Input Voltage||115V - 230V||Silent||no|
|Input Frequency Range||50Hz - 60Hz||24 Pin Mobo Connector||yes|
|+3.3V Output||20A||4+4 Pin CPU Connector||yes|
|+5V Output||20A||8 Pin Connectors||2|
|+12V Output||30A||6 Pin Connectors||1|
|+12V Count||1||4 Pin Connectors||4|
|Fan Size||120mm||SATA Connector||4|
The Diablotek PHD Series PHD450 450W power supply has a maximum wattage output of 450W. This is a very low PSU capacity, and should only be used when powering a low power system. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The Diablotek PHD Series PHD450 450W does not appear to have an 80 Plus certificate, so make sure it is as effective as you need it to be if using it in a build.
The Diablotek PHD Series PHD450 450W is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.
The Diablotek PHD Series PHD450 450W is not designed for low volumes, meaning that its constant drone while your PC is on could potentially be noticeable and irritating, though this may only be a problem for those that require silent environments.