Loading build...
Loading...
Your Shops

Cooler Master

Cooler Master B 700 v2

The Cooler Master B 700 v2 has a maximum capacity of 700 Watts.

It has an 80 Plus rating of Standard, is built to be silent, and its dimensions (LxWxH) are 140cm x 150cm x 86cm.

7.9

Cooler Master B 700 v2

help iconCapacity700Whelp iconLength140cm
help iconForm FactorATX12Vhelp iconWidth150cm
help icon80 Plus RatingStandardhelp iconHeight86cm
help iconEfficiency at 100%82.00%help iconFan Size120mm
help iconEfficiency at 50%85.00%help iconModularno
help iconEfficiency at 20%82.00%help iconSilentyes
help iconInput Voltage230V - 230Vhelp icon24 Pin Mobo Connectoryes
help iconInput Frequency Range47Hz - 63Hzhelp icon4+4 Pin CPU Connectoryes
help icon+3.3V Output22Ahelp icon8 Pin Connectors2
help icon+5V Output22Ahelp icon4 Pin Connectors4
help icon+12V Output54Ahelp iconSATA Connector6
help icon+12V Count1

Cooler Master B 700 v2 compatibility review

The Cooler Master B 700 v2 power supply has a maximum wattage output of 700W. This should run most PC builds with ease, but might not be enough for power hungry graphics card setups such as SLI or Crossfire combinations. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.

The Cooler Master B 700 v2 has an 80 Plus rating of Standard. This means the PSU operates at average efficiency levels of at least 80% for loads of 100%, 50%, and 20%. Standard is the lowest 80 Plus certificate available, but with 80% load efficiency minimums, the Cooler Master B 700 v2 is still reliably efficient and is by no means a bad PSU choice. The actual efficiencies for this PSU are 82.00%, 85.00%, and 82.00%, for loads of 100%, 50%, and 20%.

The dimensions of the Cooler Master B 700 v2 (LxWxH) are 140cm x 150cm x 86cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.

The Cooler Master B 700 v2 is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.

The Cooler Master B 700 v2 is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.

Merchant Comparison
Merchant Price
- -
Custom PC Builder Auto PC Builder Compare PSU All Power Supply list
Best Compatible Hardware by Price
Type :
$ $

Similar PSUs to Cooler Master B 700 v2