The Azza Dynamo 1100W has a maximum capacity of 1100 Watts.
It has an 80 Plus rating of Standard.
|Form Factor||Not sure||Modular||no|
|80 Plus Rating||Standard||Silent||no|
|Input Voltage||115V - 240V||24 Pin Mobo Connector||yes|
|Input Frequency Range||50Hz - 60Hz||4+4 Pin CPU Connector||yes|
|+3.3V Output||24A||8 Pin Connectors||2|
|+5V Output||30A||6 Pin Connectors||2|
|+12V Output||85A||4 Pin Connectors||1|
|+12V Count||6||SATA Connector||8|
The Azza Dynamo 1100W power supply has a maximum wattage output of 1100W. This should be enough to run multiple of even the most demanding of graphics cards with SLI or Crossfire, although it is worth double-checking if purchasing a particularly power-hungry graphics card setup. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The Azza Dynamo 1100W has an 80 Plus rating of Standard. This means the PSU operates at average efficiency levels of at least 80% for loads of 100%, 50%, and 20%. Standard is the lowest 80 Plus certificate available, but with 80% load efficiency minimums, the Azza Dynamo 1100W is still reliably efficient and is by no means a bad PSU choice.
The Azza Dynamo 1100W is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.
The Azza Dynamo 1100W is not designed for low volumes, meaning that its constant drone while your PC is on could potentially be noticeable and irritating, though this may only be a problem for those that require silent environments.