The Antec VP600P has a maximum capacity of 600 Watts.
It has an 80 Plus rating of Not sure, is built to be silent, and its dimensions (LxWxH) are 140cm x 150cm x 86cm.
|80 Plus Rating||Not sure||Fan Size||120mm|
|Input Voltage||200V - 240V||Modular||no|
|Input Frequency Range||50Hz - 60Hz||Silent||yes|
|+3.3V Output||20A||24 Pin Mobo Connector||yes|
|+5V Output||20A||4+4 Pin CPU Connector||yes|
|+12V Output||30A||8 Pin Connectors||2|
|+12V Count||2||4 Pin Connectors||2|
The Antec VP600P power supply has a maximum wattage output of 600W. This is a decent capacity, and should be fine at handling the majority of mid-performance PC builds, but you could find yourself in trouble if you do not make certain of its capability to power any proposed build. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The Antec VP600P has an 80 Plus rating of Not sure. This means the PSU operates at average efficiency levels of at least
The dimensions of the Antec VP600P (LxWxH) are 140cm x 150cm x 86cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.
The Antec VP600P is not modular, meaning that cables are built into the PSU itself and cannot be taken out and connected back in as necessary. This can result in difficult cable management and consequently a messy build and poor airflow.
The Antec VP600P is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.