The Andyson AD-700yyZZZ 700W has a maximum capacity of 700 Watts.
It has an 80 Plus rating of Titanium, is built to be modular,, is built to be silent,.
|Form Factor||ATX12V & EPS12V||+12V Output||56A|
|80 Plus Rating||Titanium||+12V Count||1|
|Efficiency at 100%||90.11%||Fan Size||120mm|
|Efficiency at 50%||94.42%||Modular||yes|
|Efficiency at 20%||94.29%||Silent||yes|
|Input Voltage||100V - 240V||24 Pin Mobo Connector||yes|
|Input Frequency Range||50Hz - 60Hz||4+4 Pin CPU Connector||yes|
The Andyson AD-700yyZZZ 700W power supply has a maximum wattage output of 700W. This should run most PC builds with ease, but might not be enough for power hungry graphics card setups such as SLI or Crossfire combinations. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The Andyson AD-700yyZZZ 700W has an 80 Plus rating of Titanium. This means the PSU operates at average efficiency levels of at least The actual efficiencies for this PSU are 90.11%, 94.42%, and 94.29%, for loads of 100%, 50%, and 20%.
The Andyson AD-700yyZZZ 700W is modular, meaning that cables can be taken out and connected back in as necessary. This can make cable management much easier, leading to a less chaotic build, and better airflow.
The Andyson AD-700yyZZZ 700W is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.