The Aerocool VP-750 750W has a maximum capacity of 750 Watts.
It has an 80 Plus rating of Standard, is built to be modular,, is built to be silent,.
|Form Factor||ATX12V||Fan Size||120mm|
|80 Plus Rating||Standard||Modular||yes|
|Input Voltage||100V - 230V||24 Pin Mobo Connector||yes|
|Input Frequency Range||50Hz - 60Hz||4+4 Pin CPU Connector||yes|
|+3.3V Output||24A||8 Pin Connectors||2|
|+5V Output||24A||4 Pin Connectors||6|
|+12V Output||50A||SATA Connector||6|
The Aerocool VP-750 750W power supply has a maximum wattage output of 750W. This should run most PC builds with ease, but might not be enough for power hungry graphics card setups such as SLI or Crossfire combinations. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The Aerocool VP-750 750W has an 80 Plus rating of Standard. This means the PSU operates at average efficiency levels of at least 80% for loads of 100%, 50%, and 20%. Standard is the lowest 80 Plus certificate available, but with 80% load efficiency minimums, the Aerocool VP-750 750W is still reliably efficient and is by no means a bad PSU choice.
The Aerocool VP-750 750W is modular, meaning that cables can be taken out and connected back in as necessary. This can make cable management much easier, leading to a less chaotic build, and better airflow.
The Aerocool VP-750 750W is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.