The Ace Power FP-550W has a maximum capacity of 550 Watts.
Its dimensions (LxWxH) are 16cm x 15cm x 8.6cm.
|Input Voltage||90V - 264V||Fan Size||120mm|
|Input Frequency Range||47Hz - 63Hz||Modular||yes|
|+5V Output||25A||24 Pin Mobo Connector||yes|
|+12V Output||25A||4+4 Pin CPU Connector||yes|
|+12V Count||2||6 Pin Connectors||2|
|Length||16cm||4 Pin Connectors||6|
The Ace Power FP-550W power supply has a maximum wattage output of 550W. This is a mid-range capacity, and should be fine as long as it is part of an equally mid-range system build. Always make sure that a purchased PSU is capable of powering your system. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.
The Ace Power FP-550W does not appear to have an 80 Plus certificate, so make sure it is as effective as you need it to be if using it in a build.
The dimensions of the Ace Power FP-550W (LxWxH) are 16cm x 15cm x 8.6cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.
The Ace Power FP-550W is modular, meaning that cables can be taken out and connected back in as necessary. This can make cable management much easier, leading to a less chaotic build, and better airflow.
The Ace Power FP-550W is designed for low volumes, meaning that its constant drone while your PC is on would be less noticeable - ideal for those that prefer silent environments.