Loading build...
Loading...
Your Shops

ABS

ABS SL Series SL1050

The ABS SL Series SL1050 has a maximum capacity of 1050 Watts.

It has an 80 Plus rating of Silver, is built to be modular, and its dimensions (LxWxH) are 16cm x 15cm x 8.6cm.

8.9

ABS SL Series SL1050

help iconCapacity1050Whelp iconLength16cm
help iconForm FactorATX12V & EPS12Vhelp iconWidth15cm
help icon80 Plus RatingSilverhelp iconHeight8.6cm
help iconEfficiency at 100%86.43%help iconFan Size135mm
help iconEfficiency at 50%89.55%help iconModularyes
help iconEfficiency at 20%87.16%help iconSilentno
help iconInput Voltage115V - 240Vhelp icon24 Pin Mobo Connectoryes
help iconInput Frequency Range50Hz - 60Hzhelp icon4+4 Pin CPU Connectoryes
help icon+3.3V Output25Ahelp icon8 Pin Connectors3
help icon+5V Output25Ahelp icon6 Pin Connectors3
help icon+12V Output87Ahelp icon4 Pin Connectors6
help icon+12V Count1help iconSATA Connector16

ABS SL Series SL1050 compatibility review

The ABS SL Series SL1050 power supply has a maximum wattage output of 1050W. This should be enough to run multiple of even the most demanding of graphics cards with SLI or Crossfire, although it is worth double-checking if purchasing a particularly power-hungry graphics card setup. Remember that a higher PSU capacity does not necessarily equate to a higher wattage output and a more expensive electricity bill. In fact, you may find that a higher capacity PSU will function more efficiently than a lower capacity PSU because it is dealing with a lower percentage of its maximum load - that is, it is not being stressed to the same extent.

The ABS SL Series SL1050 has an 80 Plus rating of Silver. This means the PSU operates at average efficiency levels of at least 85%, 88%, and 85% for loads of 100%, 50%, and 20% respectively. Silver is the third-best 80 Plus certificate available, and as such the ABS SL Series SL1050 is considerably efficient and is recommended. The actual efficiencies for this PSU are 86.43%, 89.55%, and 87.16%, for loads of 100%, 50%, and 20%.

The dimensions of the ABS SL Series SL1050 (LxWxH) are 16cm x 15cm x 8.6cm. Make sure to compare these measurements against the case you desire if planning on using it in a build.

The ABS SL Series SL1050 is modular, meaning that cables can be taken out and connected back in as necessary. This can make cable management much easier, leading to a less chaotic build, and better airflow.

The ABS SL Series SL1050 is not designed for low volumes, meaning that its constant drone while your PC is on could potentially be noticeable and irritating, though this may only be a problem for those that require silent environments.

Merchant Comparison
Merchant Price
- -
Custom PC Builder Auto PC Builder Compare PSU All Power Supply list
Best Compatible Hardware by Price
Type :
$ $

Similar PSUs to ABS SL Series SL1050