Loading build...
Loading...
Your Shops
Ghostrunner PC performance report - Graphics card, DLSS, and ray tracing benchmarks
By Chad Norton on October 26th, 2020 at 02:00pm - original article from game-debate

Ghostrunner, the first-person platforming slasher, arrives tomorrow. The Cyberpunk-themed action game involves a lot of fast movements across a gorgeously realized dystopian city, but how well does the game perform? We take a look at the PC performance benchmarks for Ghostrunner...

First of all, in this PC performance benchmark article for ¬¬g_id:36140[Ghostrunner]¬¬, we benchmark a range of graphics cards going from the higher-end ¬¬gc_id:4051[RTX 2060]¬¬, the lower-end ¬¬gc_id:3068[R7 370]¬¬, as well as the mid-range ¬¬gc_id:3540[GTX 1060]¬¬ which is close to the recommended GPU the ¬¬gc_id:2438[GTX 970]¬¬. Then we go through the FPS test results of each graphics card running at 1080p, 1440p and 4K screen resolutions. From there we can see the performance of the minimum and recommended system requirement graphics cards and consider how well optimized Ghostrunner really is.

Unfortunately, Ghostrunner does not include an in-game benchmarking tool, so for all of these results below we fired up a level, did some platforming, and sliced a couple bad guys. This is the majority of what you'll be doing in Ghostrunner so we feel this is pretty representative of your experience playing most of the game in terms of FPS performance.

In addition, when launching Ghostrunner for the first time from Steam you will be greeted with a message asking whether to run the game using the DirectX11 or DirectX12 API, the latter of which will be needed to enable ray tracing settings.

We found performance to be quite... interesting, depending on the graphics card you're using, so we've provided some comparisons in performance between the two APIs. This could easily be chalked up to the fact that the DX12 API is currently an experimental build, so there are likely some issues to run into there.

Ghostrunner also features the use of DLSS support to increase performance by rendering at a lower resolution then upscaling to your desired resolution. Since this will be most relevant for enabling ray tracing, we've also provided a performance comparison using the RTX 2060 whilst using the technology.

With that in mind, let's jump into the performance benchmarks for Ghostrunner...

Ghostrunner PC Graphics Settings

Check your PC can run Ghostrunner system requirements

--------------------

¬¬advert¬¬

Ghostrunner minimum system requirements

Ghostrunner recommended system requirements

--------------------

¬¬advert¬¬

CLICK ANY IMAGE IN THIS PAGE TO EXPAND THE IMAGE

Ghostrunner GTX 1060 benchmarks and frames per second analysis performed on Nvidia MSI GeForce GTX 1060 | Intel i7-5820K | 16GB

Ghostrunner Nvidia RTX 2060 DX11 FPS performance graph 1080p 4K

Average FPS for  in Ghostrunner DX11 @ 1080p

Ghostrunner Low Medium High Epic
Average FPS 59.9 59.9 59.9 59.8
Min FPS 58.9 57.5 58.2 53.8
Max FPS 60.7 60.9 60.9 60.9
1% Low FPS 38.5 38 38.5 42.4
0.1% Low FPS 35.9 22.9 24.9 36.3

At first I booted up the game using a GTX 1060 using the DirectX11 API to see what performance would be like. Surprisingly, upon loading I found that performance was capped at 60fps no matter what graphics settings were used. As you can see, the average frame rate never goes above 60fps.

Average FPS for  in Ghostrunner DX11 @ 4K

Ghostrunner Low Medium High Epic
Average FPS 59.9 59.9 59.9 58.8
Min FPS 59.6 58.3 59.1 46.7
Max FPS 60.2 60.9 60.8 61
1% Low FPS 54.8 42.3 41.6 41.2
0.1% Low FPS 50.5 33.1 34.3 30.3

I then decided to run Ghostrunner at 4K using the DX11 API to see if performance would be different at all. Again you can see that the frame rate is capped at 60fps since the average frame rate never goes above that.

I couldn't discover a fix for this and deduced that it must be from no exclusive fullscreen option available and the fact that some games cap your FPS to the monitor's refresh rate on borderless windowed mode. Nevertheless, I decided to launch the game again using the DirectX12 API to see if there would be any difference.

¬¬advert¬¬

Ghostrunner GTX 1060 DirectX12 API benchmarks

Upon launching Ghostrunner using DX12 instead of DX11, I noticed a significant boost in frame rate above 60fps, suggesting that the root problem had something to do with the DiretX11 API.

I then tried to switch between resolutions and seemingly tricking the game by changing my desktop resolution using the Nvidia Control Panel (as borderless fullscreen mode matches your monitor resolution and can't be changed) and then relaunching Ghostrunner. However, whilst it had a slight impact on performance, the rest of the cards saw barely any difference in terms of performance between resolutions, so I'm unsure as to what the actual problem here is.

Nevertheless, there was definitely something happening though as the FPS did decrease on average when increasing the game's resolution. So if you're interested in the results, then here are the PC performance benchmarks for the GTX 1060 graphics card...

Ghostrunner Nvidia RTX 2060 DX12 FPS performance graph 1080p 1440p 4K

Average FPS for  in Ghostrunner DX12 @ 1080p

Ghostrunner Low Medium High Epic
Average FPS 147.4 132.7 103.4 72.7
Min FPS 112.3 96.9 82.3 55.2
Max FPS 181.9 167.8 126.1 87.9
1% Low FPS 102.1 78.2 69.4 52.1
0.1% Low FPS 94.7 50.2 53.2 48.3

The FPS performance for the GTX 1060 at 1080p resolution in Ghostrunner is really good, achieving higher than 60fps even on the highest graphics settings, leaving room for some FPS drops in the game's most demanding moments. Overall, the GTX 1060 is perfectly suitable for playing Ghostrunner on Epic graphics settings at 1080p.

Average FPS for  in Ghostrunner DX12 @ 1440p

Ghostrunner Low Medium High Epic
Average FPS 131.4 116 90.1 64.6
Min FPS 99.5 85.6 72.4 48.9
Max FPS 159.9 145.9 110.1 77.4
1% Low FPS 90.4 75.6 61.1 45.7
0.1% Low FPS 79.8 51.6 51.8 17.5

At 1440p, the FPS performance for the GTX 1060 graphics card in Ghostrunner is still really good, one again achieving higher than 60fps even on the highest graphics settings.

Average FPS for  in Ghostrunner DX12 @ 4K

Ghostrunner Low Medium High Epic
Average FPS 129.9 116 89.1 64.2
Min FPS 89.8 84.4 65.1 47.6
Max FPS 161.3 147.9 109.2 80.4
1% Low FPS 25.3 68.3 32.3 46
0.1% Low FPS 12.6 11.8 17.5 42.5

Finally, for 4K, the GTX 1060's FPS performance in Ghostrunner is once again really good, delivering above 60fps performance even on Epic graphics settings. Overall, the GTX 1060 seems to be perfectly suitable for running Ghostrunner on the highest graphics settings at 1080p, 1440p, and even 4K resolutions.

As you can see though by looking at the results above, there is definitely a difference in FPS performance when changing your desktop resolution in Ghostrunner whilst running in Borderless Window mode. However, the change is so miniscule between 1440p and 4K that I'm unsure whether this is to do with the DX12 API, borderless window mode, or even the game not actually running at a higher resolution than the 1080p monitor we were using for these tests.

Because of this, I wouldn't take the 1440p and 4K results as accurate benchmarks, as a 10fps difference between 1080p Epic graphics and 4K Epic graphics doesn't seem right. Though if you have any ideas yourself as to why this is happening, or even if you have a 4K monitor and some FPS results from Ghostrunner then do please let us know in the discussion are below!

--------------------

¬¬advert¬¬

Ghostrunner R7 370 benchmarks and frames per second analysis performed on AMD XFX R7 370 | Intel i7-5820K | 16GB

After using the GTX 1060 graphics card I switched to the Radeon R7 370, as the RX 550 4GB version is listed as the required GPU for minimum specs (60fps, Low graphics settings, 720p resolution) and I wanted to see what performance on a lower-end GPU would be like, and whether it could run Ghostrunner at 1080p resolution.

Ghostrunner AMD R7 370 DX11 vs DX12 API FPS performance graph 1080p

Average FPS for ¬¬gc_id:3068[AMD Radeon R7 370]¬¬ in Ghostrunner DX11 @ 1080p

Ghostrunner Low Medium High Epic
Average FPS 58.9 55 41.3 28.6
Min FPS 50.2 45.1 32.9 22.4
Max FPS 60.7 61.5 49.6 34.5
1% Low FPS 43.3 37.5 31.5 16.8
0.1% Low FPS 25.1 19.5 27.7 11

The FPS performance of the R7 370 at 1080p when using the DirectX11 API in Ghostrunner is okay. At Low and Medium graphics settings this card handles performance relatively well and is still comfortable and playable at this performance.

However at High and Epic graphics settings, performance drops considerably and considering the fast-paced quick-thinking nature of Ghostrunner this felt very uncomfortable to play and I noticed my performance in-game was negatively affected.

Average FPS for ¬¬gc_id:3068[AMD Radeon R7 370]¬¬ in Ghostrunner DX12 @ 1080p

Ghostrunner Low Medium High Epic
Average FPS 49.6 44.6 33.3 22.9
Min FPS 40.9 36.7 27.6 18.7
Max FPS 60.3 56.1 39.6 28.1
1% Low FPS 19.9 26.8 17.4 17.2
0.1% Low FPS 13.5 6.1 11.4 11.4

When using the DirectX12 API in Ghostrunner at 1080p with the R7 370 GPU, the FPS performance actually decreased. Here I would say on Low graphics settings was comfortable, whilst Medium was certainly playable but very hard to be precise in my movements and accuracy. High and Epic graphics settings here are a no go same as above.

As you can see, there is a noticeable difference between using the DirectX11 and DirectX12 APIs. If you are using the DX12 API in Ghostrunner you will find you can gain anywhere from 5-10 fps just by switching over to DX11 instead. Interestingly, this is the opposite of what we've seen in the GTX 1060 benchmarks above and the RTX 2060 benches below.

--------------------

¬¬advert¬¬

Ghostrunner RTX 2060 benchmarks and frames per second analysis performed on Nvidia MSI GeForce RTX 2060 | Intel i7-5820K | 16GB

Ghostrunner API performance comparison DirectX11 vs DirectX12

Ghostrunner Nvidia RTX 2060 DX11 vs DX12 API FPS performance graph 1080p

Average FPS for ¬¬gc_id:4051[Nvidia GeForce RTX 2060]¬¬ in Ghostrunner DX11 @ 1080p

Ghostrunner Low Medium High Epic
Average FPS 189.7 172.8 146 122
Min FPS 120.3 110.8 100.1 89.9
Max FPS 310.2 261.9 202.4 154.4
1% Low FPS 94.3 66.6 60 65.4
0.1% Low FPS 55 23.1 46.5 52.3

The FPS performance for the RTX 2060 in Ghostrunner is really great, achieving well above 60fps even on the highest graphics settings at 1080p resolution when using the DirectX11 API. Overall, the RTX 2060 is perfect for running Ghostrunner at 1080p on Ultra graphics settings.

Average FPS for ¬¬gc_id:4051[Nvidia GeForce RTX 2060]¬¬ in Ghostrunner DX12 @ 1080p

Ghostrunner Low Medium High Epic
Average FPS 219.2 188.7 152.9 117.7
Min FPS 172.6 142.3 117.2 91.8
Max FPS 275.4 236.4 193.5 142.3
1% Low FPS 134.4 85.8 50.9 85.2
0.1% Low FPS 17.2 10.7 14.5 55

As for the DirectX12 API, the RTX 2060's FPS performance is even greater the lower the graphics settings, regularly achieving higher FPS than DX11 on Low-High graphics settings. However, when running Ghostrunner on Epic graphics settings in DX12, FPS is actually lower than the DX11 equivalent.

Interestingly though, it seems that DirectX11 is much more stable than DirectX12, as DX11 showed considerably higher 0.1% FPS than DX12, which we would say was very noticeable in gameplay. Using DX12 introduced a lot of stuttering whereas DX11 felt a lot smoother to play. So unless you want to be using the ray traced effects, we would suggest sticking to DX11 on the RTX 2060.

Overall though, no matter the API you are using the RTX 2060 is perfect for playing Ghostrunner at 1080p on the highest graphics settings available.

¬¬advert¬¬

Ghostrunner ray tracing and DLSS performance benchmarks

Ghostrunner Nvidia RTX 2060 ray tracing FPS performance graph 1080p

Average FPS for ¬¬gc_id:4051[Nvidia GeForce RTX 2060]¬¬ in Ghostrunner DX12 @ 1080p + ray tracing

Ghostrunner Low Medium High Epic
Average FPS 75.6 59.6 46 41.1
Min FPS 62.8 36.4 62.4 30.8
Max FPS 89.4 84.5 66.9 57.1
1% Low FPS 56.3 33.1 30.1 28.6
0.1% Low FPS 30.4 26.7 19.6 16.8

As for ray tracing performance, the FPS performance of the RTX 2060 is okay, reaching around 60fps or higher on Medium or Low graphics settings. On High or even Epic graphics settings frame rate drops below 50fps and becomes noticeably more stuttery, though not unplayable.

Overall, the RTX 2060 is fine for running Ghostrunner and using ray tracing effects, however it is recommended to use DLSS at the same time when using this specific GPU.

Ghostrunner Nvidia RTX 2060 DLSS ray tracing FPS performance graph 1080p

Average FPS for ¬¬gc_id:4051[Nvidia GeForce RTX 2060]¬¬ in Ghostrunner DX12 @ 1080p + ray tracing & DLSS

Ghostrunner Off Performance Balanced Quality
Average FPS 41.1 74.2 71.2 64.5
Min FPS 30.8 62.4 55.7 50.7
Max FPS 57.1 90.3 87.8 78
1% Low FPS 28.6 53.1 48.8 45.7
0.1% Low FPS 16.8 30.6 23 25.2

With the low frame rate on Epic graphics settings whilst enabling ray traced reflections and shows in Ghostrunner, we wanted to see if enabling Nvidia's DLSS technology would significantly increase frame rate to a playable state. Ghostrunner currently includes Performance, Balanced, and Quality mode DLSS options, giving us varied control over what kind of image quality and performance we expect. All results above were taken when running Ghostrunner at 1080p resolution at the highest graphics settings with ray tracing enabled.

Looking over the results, we can see that enabling DLSS in Ghostrunner whilst using ray tracing effects increase frame rate performance significantly, achieving 23-33 higher fps depending on the DLSS mode used.

Performance mode would be your best bet for the best performance throughout the game, whilst Quality mode may dip below 60fps during some of the more demanding moments in-game, but certainly not to anything unplayable.

--------------------

¬¬advert¬¬

Conclusion

Looking over all the results, we can see that Ghostrunner is not a very demanding game and can run very smoothly on most modern PC hardware, unless you are using the ray traced effects of course. Though the inclusion of DLSS technology can even further improve your performance.

Ghostrunner can also run on low-end hardware, though only on the lower graphics settings. However, the use of FidelityFX upscaling from AMD should increase frame rate without affecting image quality too much.

There does seem to be some performance discrepancies between DirectX11 and DirectX12 APIs, sometimes capping the frame rate t your monitor's refresh rate when using DX11. Though you will almost always experience higher FPS when using DX12, but at the cost of some noticeable stuttering. Though this may only occur with Nvidia cards, as there are some cases where switching to DX12 may actually decrease frame rate, but this was with the lower-end R7 370 AMD GPU.

If you want to run Ghostrunner at its best, it's recommended to try out some benches yourself between the DX11 and DX12 APIs and let us know what kind of results you got. Did you see an improvement from DX11 to DX12? Or a decrease? That way we can determine better what is causing some of these performance discrepancies.

Ghostrunner PC performance report - Graphics card DLSS and ray tracing benchmarks_NB