The MSI B150M Night Elf is compatible with Intel processors with the LGA 1151 socket.
It has 64 GB DDR4 maximum RAM and conforms to the Micro-ATX form factor standard.
|CPU Socket||LGA 1151||SLI Support||1 graphics cards|
|CPU Compatible Make||Intel||Crossfire Support||1 graphics cards|
|CPU Chipset||Intel® B150||Onboard GPU||no|
|Form Factor||Micro-ATX||PCI Slots|
|Max RAM||64 GB DDR4||SATA 1.0||0|
|RAM Slots||4 x DDR4||SATA 2.0||0|
|Memory Channels||2||SATA 3.0||0|
|Compatible RAM Speeds||RAID Support||yes|
|USB 2.0 Rear||6||Internal I/O|
|Graphics Card Interface||Not sure||Back Panel I/O|
The MSI B150M Night Elf uses the Intel LGA 1151 CPU socket. Any compatible Intel CPU will have the same socket entry. It uses the DDR4 memory type, with maximum speeds of up to 2133 MHz, and 0 DDR4 slots allowing for a maximum total of 64 GB RAM.
The Micro-ATX MSI B150M Night Elf should fit into all ATX cases, but its smaller size allows you to downsize your system build as a whole. Its size comes at the cost of features, so there are likely to be far fewer connections and expansion options available than in a larger motherboard.
The MSI B150M Night Elf does not support onboard graphics. Any system build that uses this motherboard therefore requires a separate graphics card, or a processor that has a GPU on the same die, such as AMD APU processors. There are 2 PCIe x16 slots on this motherboard. This means it is perfectly capable of accommodating the latest graphics cards, although it is important to try and use a graphics card with the same graphics card interface of Not sure, as anything below will not reach the motherboard's potential, and anything above will have its performance slashed to the bandwidth maximum of the MSI B150M Night Elf's Not sure. The MSI B150M Night Elf does not support multiple graphics cards via Nvidia SLI or AMD Crossfire.
The MSI B150M Night Elf has 6 USB 2.0 slots but no USB 3.0 slots. While USB 3.0 slots are so far by no means necessary, and with a plethora of USB 2.0 peripherals to choose from, the USB functionality on this motherboard should be fine. If planning on building a new system, a motherboard with USB 3.0 is likely to have a longer life cycle, however.