The Gigabyte GA-B150M-DS3P (rev. 1.0) is compatible with Intel processors with the LGA 1151 socket.
It has 0 GB DDR4 maximum RAM and conforms to the Micro-ATX form factor standard.
|CPU Socket||LGA 1151||Crossfire Support||1 graphics cards|
|CPU Compatible Make||Intel||Onboard GPU||no|
|CPU Chipset||B150||PCI Slots|
|Form Factor||Micro-ATX||SATA 1.0||0|
|Max RAM||0 GB DDR4||SATA 2.0||0|
|RAM Slots||4 x DDR4||SATA 3.0||0|
|Memory Channels||2||RAID Support||yes|
|Compatible RAM Speeds||Internal I/O|
|Graphics Card Interface||Not sure||Back Panel I/O|
|SLI Support||1 graphics cards|
The Gigabyte GA-B150M-DS3P (rev. 1.0) uses the Intel LGA 1151 CPU socket. Any compatible Intel CPU will have the same socket entry.
The Micro-ATX Gigabyte GA-B150M-DS3P (rev. 1.0) should fit into all ATX cases, but its smaller size allows you to downsize your system build as a whole. Its size comes at the cost of features, so there are likely to be far fewer connections and expansion options available than in a larger motherboard.
The Gigabyte GA-B150M-DS3P (rev. 1.0) does not support onboard graphics. Any system build that uses this motherboard therefore requires a separate graphics card, or a processor that has a GPU on the same die, such as AMD APU processors. There are 1 PCIe x16 slots on this motherboard. This means it is perfectly capable of accommodating the latest graphics cards, although it is important to try and use a graphics card with the same graphics card interface of Not sure, as anything below will not reach the motherboard's potential, and anything above will have its performance slashed to the bandwidth maximum of the Gigabyte GA-B150M-DS3P (rev. 1.0) 's Not sure. The Gigabyte GA-B150M-DS3P (rev. 1.0) does not support multiple graphics cards via Nvidia SLI or AMD Crossfire.