Loading build...
Loading...
Your Shops

GigaByte

GigaByte GA-H110M-S2HP (rev. 1.0)

The GigaByte GA-H110M-S2HP (rev. 1.0) is compatible with Intel processors with the LGA 1151 socket.

It has 32 GB DDR4 maximum RAM and conforms to the Micro-ATX form factor standard.

5

GigaByte GA-H110M-S2HP (rev. 1.0)

help iconCPU SocketLGA 1151help iconGraphics Card InterfaceNot sure
help iconCPU Compatible MakeIntelhelp iconSLI Support1 graphics cards
help iconCPU ChipsetH110help iconCrossfire Support1 graphics cards
help iconForm FactorMicro-ATXhelp iconOnboard GPUno
help iconMax RAM32 GB DDR4help iconPCI Slots
  • 2 x PCIe x1 v2.0
  • 1 x PCIe x16 v3.0
help iconRAM Slots2 x DDR4help iconSATA 1.00
help iconMemory Channels2help iconSATA 2.00
help iconCompatible RAM Speeds
  • DDR4 2133 MHz
help iconSATA 3.00
help iconUSB 2.0 Internal Slots2help iconRAID Supportyes
help iconUSB 2.0 Rear2help iconInternal I/O
  • 1 x 24 pin power connector
  • 1 x 4 pin power connector
  • 1 x fan header
  • 1 x S/PDIF connector
  • TPM Chip
help iconUSB 3.0 Internal1help iconBack Panel I/O
  • D-Sub Connector
  • DVI connector"
  • Line In Connector
  • Line Out Connector
  • Mic In connector
  • PS/2 keyboard connector
  • PS/2 mouse connector
help iconUSB 3.0 Rear2

GigaByte GA-H110M-S2HP (rev. 1.0) compatibility review

The GigaByte GA-H110M-S2HP (rev. 1.0) uses the Intel LGA 1151 CPU socket. Any compatible Intel CPU will have the same socket entry. It uses the DDR4 memory type, with maximum speeds of up to 2133 MHz, and 0 DDR4 slots allowing for a maximum total of 32 GB RAM.

The Micro-ATX GigaByte GA-H110M-S2HP (rev. 1.0) should fit into all ATX cases, but its smaller size allows you to downsize your system build as a whole. Its size comes at the cost of features, so there are likely to be far fewer connections and expansion options available than in a larger motherboard.

The GigaByte GA-H110M-S2HP (rev. 1.0) has 4 SATA 3.0 hard drive slots. These allow for theoretical data transfer speeds of up to 6GB/s, as opposed to the 3GB/s of SATA 2.0. Generally speaking, only high performance hard drives, specifically solid-state drives, will be able to take advantage of the bandwidth potential of SATA 3.0 ports, though it is backwards compatible, so you do not have to take advantage.

The GigaByte GA-H110M-S2HP (rev. 1.0) does not support onboard graphics. Any system build that uses this motherboard therefore requires a separate graphics card, or a processor that has a GPU on the same die, such as AMD APU processors. There are 1 PCIe x16 slots on this motherboard. This means it is perfectly capable of accommodating the latest graphics cards, although it is important to try and use a graphics card with the same graphics card interface of Not sure, as anything below will not reach the motherboard's potential, and anything above will have its performance slashed to the bandwidth maximum of the GigaByte GA-H110M-S2HP (rev. 1.0) 's Not sure. The GigaByte GA-H110M-S2HP (rev. 1.0) does not support multiple graphics cards via Nvidia SLI or AMD Crossfire.

The GigaByte GA-H110M-S2HP (rev. 1.0) has 4 USB 2.0 slots and 3 USB 3.0 slots. USB 3.0 slots are theoretically capable of data transfer speeds of up to 5 Gbit/s, which is over 10 times faster than the USB 2.0 top speed of 480 Mbit/s. Although USB 2.0 slots alone currently serve as well as ever, an upgrade would better future-proof your system as more USB 3.0 compatible peripherals emerge. USB 3.0 is also backwards compatible with USB 2.0, which means you do not even have to use the newer slot functionality if you do not wish to.

Merchant Comparison
Merchant Price
- -
Custom PC Builder Auto PC Builder Compare Mobo All Motherboard list
Best Compatible Hardware by Price
Type :
$ $

Similar Motherboards to GigaByte GA-H110M-S2HP (rev. 1.0)