The Biostar Hi-Fi A85S3 Ver. 6.1 is compatible with AMD processors with the Socket FM2 socket.
It has 32 GB DDR3 maximum RAM and conforms to the Micro-ATX form factor standard.
|CPU Socket||Socket FM2||Graphics Card Interface||PCIe v2.x|
|CPU Compatible Make||AMD||SLI Support||1 graphics cards|
|CPU Chipset||A85X||Crossfire Support||1 graphics cards|
|Form Factor||Micro-ATX||Onboard GPU||no|
|Max RAM||32 GB DDR3||PCI Slots|
|RAM Slots||2 x DDR3||SATA 1.0||0|
|Memory Channels||2||SATA 2.0||0|
|Compatible RAM Speeds||SATA 3.0||0|
|USB 2.0 Internal Slots||2||RAID Support||yes|
|USB 2.0 Rear||2||Internal I/O|
|USB 3.0 Internal||1||Back Panel I/O|
|USB 3.0 Rear||2|
The Biostar Hi-Fi A85S3 Ver. 6.1 uses the AMD Socket FM2 CPU socket. Any compatible AMD CPU will have the same socket entry. It uses the DDR3 memory type, with maximum speeds of up to 2133 MHz, and 2 DDR3 slots allowing for a maximum total of 32 GB RAM.
The Micro-ATX Biostar Hi-Fi A85S3 Ver. 6.1 should fit into all ATX cases, but its smaller size allows you to downsize your system build as a whole. Its size comes at the cost of features, so there are likely to be far fewer connections and expansion options available than in a larger motherboard.
The Biostar Hi-Fi A85S3 Ver. 6.1 has 6 SATA 3.0 hard drive slots. These allow for theoretical data transfer speeds of up to 6GB/s, as opposed to the 3GB/s of SATA 2.0. Generally speaking, only high performance hard drives, specifically solid-state drives, will be able to take advantage of the bandwidth potential of SATA 3.0 ports, though it is backwards compatible, so you do not have to take advantage.
The Biostar Hi-Fi A85S3 Ver. 6.1 does not support onboard graphics. Any system build that uses this motherboard therefore requires a separate graphics card, or a processor that has a GPU on the same die, such as AMD APU processors. There are 1 PCIe x16 slots on this motherboard. This means it is perfectly capable of accommodating the latest graphics cards, although it is important to try and use a graphics card with the same graphics card interface of PCIe v2.x, as anything below will not reach the motherboard's potential, and anything above will have its performance slashed to the bandwidth maximum of the Biostar Hi-Fi A85S3 Ver. 6.1's PCIe v2.x. The Biostar Hi-Fi A85S3 Ver. 6.1 does not support multiple graphics cards via Nvidia SLI or AMD Crossfire.
The Biostar Hi-Fi A85S3 Ver. 6.1 has 4 USB 2.0 slots and 3 USB 3.0 slots. USB 3.0 slots are theoretically capable of data transfer speeds of up to 5 Gbit/s, which is over 10 times faster than the USB 2.0 top speed of 480 Mbit/s. Although USB 2.0 slots alone currently serve as well as ever, an upgrade would better future-proof your system as more USB 3.0 compatible peripherals emerge. USB 3.0 is also backwards compatible with USB 2.0, which means you do not even have to use the newer slot functionality if you do not wish to.