Loading build...
Loading...
Your Shops

Biostar

Biostar B350ET2 Ver. 6.x

The Biostar B350ET2 Ver. 6.x is compatible with AMD processors with the Socket AM4 socket.

It has 32 GB DDR4 maximum RAM and conforms to the Micro-ATX form factor standard.

3.9

Biostar B350ET2 Ver. 6.x

help iconCPU SocketSocket AM4help iconSLI Support1 graphics cards
help iconCPU Compatible MakeAMDhelp iconCrossfire Support1 graphics cards
help iconCPU ChipsetB350help iconOnboard GPUno
help iconForm FactorMicro-ATXhelp iconPCI Slots
  • 2 x PCIe x1 v3.0
  • 1 x PCIe x16 v3.0
help iconMax RAM32 GB DDR4help iconSATA 1.00
help iconRAM Slots2 x DDR4help iconSATA 2.00
help iconMemory Channels2help iconSATA 3.00
help iconCompatible RAM Speeds
  • DDR4 2133 MHz
  • DDR4 2400 MHz
  • DDR4 2666 MHz
help iconRAID Supportyes
help iconUSB 2.0 Internal Slots2help iconInternal I/O
  • 1 x 24 pin power connector
  • 1 x 8 pin power connector
  • 1 x fan header
  • System Panel Connection
help iconUSB 2.0 Rear4help iconBack Panel I/O
  • DVI connector"
  • Line In Connector
  • Line Out Connector
  • Mic In connector
  • PS/2 keyboard connector
  • PS/2 mouse connector
help iconGraphics Card InterfacePCIe v3.0

Biostar B350ET2 Ver. 6.x compatibility review

The Biostar B350ET2 Ver. 6.x uses the AMD Socket AM4 CPU socket. Any compatible AMD CPU will have the same socket entry. It uses the DDR4 memory type, with maximum speeds of up to 2666 MHz, and 0 DDR4 slots allowing for a maximum total of 32 GB RAM.

The Micro-ATX Biostar B350ET2 Ver. 6.x should fit into all ATX cases, but its smaller size allows you to downsize your system build as a whole. Its size comes at the cost of features, so there are likely to be far fewer connections and expansion options available than in a larger motherboard.

The Biostar B350ET2 Ver. 6.x has 4 SATA 3.0 hard drive slots. These allow for theoretical data transfer speeds of up to 6GB/s, as opposed to the 3GB/s of SATA 2.0. Generally speaking, only high performance hard drives, specifically solid-state drives, will be able to take advantage of the bandwidth potential of SATA 3.0 ports, though it is backwards compatible, so you do not have to take advantage.

The Biostar B350ET2 Ver. 6.x does not support onboard graphics. Any system build that uses this motherboard therefore requires a separate graphics card, or a processor that has a GPU on the same die, such as AMD APU processors. There are 1 PCIe x16 slots on this motherboard. This means it is perfectly capable of accommodating the latest graphics cards, although it is important to try and use a graphics card with the same graphics card interface of PCIe v3.0, as anything below will not reach the motherboard's potential, and anything above will have its performance slashed to the bandwidth maximum of the Biostar B350ET2 Ver. 6.x's PCIe v3.0. The Biostar B350ET2 Ver. 6.x does not support multiple graphics cards via Nvidia SLI or AMD Crossfire.

The Biostar B350ET2 Ver. 6.x has 6 USB 2.0 slots but no USB 3.0 slots. While USB 3.0 slots are so far by no means necessary, and with a plethora of USB 2.0 peripherals to choose from, the USB functionality on this motherboard should be fine. If planning on building a new system, a motherboard with USB 3.0 is likely to have a longer life cycle, however.

Merchant Comparison
Merchant Price
- -
Custom PC Builder Auto PC Builder Compare Mobo All Motherboard list
Best Compatible Hardware by Price
Type :
$ $

Similar Motherboards to Biostar B350ET2 Ver. 6.x