Loading build...
Loading...
Your Shops

Abit

Abit IP-95

The Abit IP-95 is compatible with Intel processors with the LGA 775/ Socket T socket.

It has 4 GB DDR2 maximum RAM and conforms to the Micro-ATX form factor standard.

3.5

Abit IP-95

help iconCPU SocketLGA 775/ Socket Thelp iconSLI Support1 graphics cards
help iconCPU Compatible MakeIntelhelp iconCrossfire Support1 graphics cards
help iconCPU ChipsetVIA P4M890/ VT8237R Plushelp iconOnboard GPUyes
help iconForm FactorMicro-ATXhelp iconPCI Slots
  • 1 x PCIe x1 v2.0
  • 1 x PCIe x16 v2.0
help iconMax RAM4 GB DDR2help iconSATA 1.02
help iconRAM Slots2 x DDR2help iconSATA 2.00
help iconMemory Channels2help iconSATA 3.00
help iconCompatible RAM Speeds
  • DDR2 533 MHz
help iconRAID Supportyes
help iconUSB 2.0 Internal Slots2help iconInternal I/O
  • 1 x 24 pin power connector
  • Floppy drive connector
  • CD/DVD drive connector
  • 1 x IDE connector
help iconUSB 2.0 Rear4help iconBack Panel I/O
  • D-Sub Connector
  • 1 x Serial Port
  • Line In Connector
  • Line Out Connector
  • Mic In connector
  • Audio Input Output
  • PS/2 keyboard connector
  • PS/2 mouse connector
help iconGraphics Card InterfacePCIe v2.x

Abit IP-95 compatibility review

The Abit IP-95 uses the Intel LGA 775/ Socket T CPU socket. Any compatible Intel CPU will have the same socket entry. It uses the aging DDR2 memory type, with maximum speeds of up to 533 MHz, and 2 DDR2 slots allowing for a maximum total of 4 GB RAM. DDR2 memory is exceptionally out of date, and considering how cheap DDR3 RAM is, using a motherboard with only DDR2 compatibility in a modern system build would be a very bad idea.

The Micro-ATX Abit IP-95 should fit into all ATX cases, but its smaller size allows you to downsize your system build as a whole. Its size comes at the cost of features, so there are likely to be far fewer connections and expansion options available than in a larger motherboard.

The Abit IP-95 supports onboard graphics. This allows for integrated graphics when paired with a compatible CPU that supports them. Integrated graphics are a cheap alternative to using a graphics card, but should be avoided when frequently using modern applications or games that require intense graphical processing. There are 1 PCIe x16 slots on this motherboard. This means it is perfectly capable of accommodating the latest graphics cards, although it is important to try and use a graphics card with the same graphics card interface of PCIe v2.x, as anything below will not reach the motherboard's potential, and anything above will have its performance slashed to the bandwidth maximum of the Abit IP-95's PCIe v2.x. The Abit IP-95 does not support multiple graphics cards via Nvidia SLI or AMD Crossfire.

The Abit IP-95 has 6 USB 2.0 slots but no USB 3.0 slots. While USB 3.0 slots are so far by no means necessary, and with a plethora of USB 2.0 peripherals to choose from, the USB functionality on this motherboard should be fine. If planning on building a new system, a motherboard with USB 3.0 is likely to have a longer life cycle, however.

Merchant Comparison
Merchant Price
ebay $32.00
Custom PC Builder Auto PC Builder Compare Mobo All Motherboard list
Best Compatible Hardware by Price
Type :
$ $

Similar Motherboards to Abit IP-95