The ASRock Fatal1ty H170 Performance is compatible with Intel processors with the LGA 1151 socket.
It has 64 GB DDR4 maximum RAM and conforms to the ATX form factor standard.
|CPU Socket||LGA 1151||SLI Support||1 graphics cards|
|CPU Compatible Make||Intel||Crossfire Support||1 graphics cards|
|CPU Chipset||Intel® H170||Onboard GPU||no|
|Form Factor||ATX||PCI Slots|
|Max RAM||64 GB DDR4||SATA 1.0||0|
|RAM Slots||4 x DDR4||SATA 2.0||0|
|Memory Channels||2||SATA 3.0||0|
|Compatible RAM Speeds||RAID Support||yes|
|USB 3.0 Internal||2||Internal I/O|
|USB 3.0 Rear||6||Back Panel I/O|
|Graphics Card Interface||PCIe v3.0|
The ASRock Fatal1ty H170 Performance uses the Intel LGA 1151 CPU socket. Any compatible Intel CPU will have the same socket entry. It uses the DDR4 memory type, with maximum speeds of up to 2133 MHz, and 0 DDR4 slots allowing for a maximum total of 64 GB RAM.
Conforming to the ATX standard, the ASRock Fatal1ty H170 Performance should fit into the majority of cases. ATX is the most common form factor, and as such has a high degree of compatibility with other components while providing a decent number of slots to widen your expansion options.
The ASRock Fatal1ty H170 Performance has 6 SATA 3.0 hard drive slots. These allow for theoretical data transfer speeds of up to 6GB/s, as opposed to the 3GB/s of SATA 2.0. Generally speaking, only high performance hard drives, specifically solid-state drives, will be able to take advantage of the bandwidth potential of SATA 3.0 ports, though it is backwards compatible, so you do not have to take advantage.
The ASRock Fatal1ty H170 Performance does not support onboard graphics. Any system build that uses this motherboard therefore requires a separate graphics card, or a processor that has a GPU on the same die, such as AMD APU processors. There are 2 PCIe x16 slots on this motherboard. This means it is perfectly capable of accommodating the latest graphics cards, although it is important to try and use a graphics card with the same graphics card interface of PCIe v3.0, as anything below will not reach the motherboard's potential, and anything above will have its performance slashed to the bandwidth maximum of the ASRock Fatal1ty H170 Performance's PCIe v3.0. The ASRock Fatal1ty H170 Performance does not support multiple graphics cards via Nvidia SLI or AMD Crossfire.
The ASRock Fatal1ty H170 Performance has 0 USB 2.0 slots and 8 USB 3.0 slots. USB 3.0 slots are theoretically capable of data transfer speeds of up to 5 Gbit/s, which is over 10 times faster than the USB 2.0 top speed of 480 Mbit/s. Although USB 2.0 slots alone currently serve as well as ever, an upgrade would better future-proof your system as more USB 3.0 compatible peripherals emerge. USB 3.0 is also backwards compatible with USB 2.0, which means you do not even have to use the newer slot functionality if you do not wish to.