The ASRock Fatal1ty B250M Performance is compatible with Intel processors with the LGA 1151 socket.
It has 64 GB DDR4 maximum RAM and conforms to the Micro-ATX form factor standard.
|CPU Socket||LGA 1151||Graphics Card Interface||PCIe v3.0|
|CPU Compatible Make||Intel||SLI Support||1 graphics cards|
|CPU Chipset||Intel® B250||Crossfire Support||1 graphics cards|
|Form Factor||Micro-ATX||Onboard GPU||no|
|Max RAM||64 GB DDR4||PCI Slots|
|RAM Slots||4 x DDR4||SATA 1.0||0|
|Memory Channels||2||SATA 2.0||0|
|Compatible RAM Speeds||SATA 3.0||0|
|USB 2.0 Internal Slots||2||RAID Support||yes|
|USB 2.0 Rear||2||Internal I/O|
|USB 3.0 Internal||1||Back Panel I/O|
|USB 3.0 Rear||4|
The ASRock Fatal1ty B250M Performance uses the Intel LGA 1151 CPU socket. Any compatible Intel CPU will have the same socket entry. It uses the DDR4 memory type, with maximum speeds of up to 2400 MHz, and 0 DDR4 slots allowing for a maximum total of 64 GB RAM.
The Micro-ATX ASRock Fatal1ty B250M Performance should fit into all ATX cases, but its smaller size allows you to downsize your system build as a whole. Its size comes at the cost of features, so there are likely to be far fewer connections and expansion options available than in a larger motherboard.
The ASRock Fatal1ty B250M Performance has 6 SATA 3.0 hard drive slots. These allow for theoretical data transfer speeds of up to 6GB/s, as opposed to the 3GB/s of SATA 2.0. Generally speaking, only high performance hard drives, specifically solid-state drives, will be able to take advantage of the bandwidth potential of SATA 3.0 ports, though it is backwards compatible, so you do not have to take advantage.
The ASRock Fatal1ty B250M Performance does not support onboard graphics. Any system build that uses this motherboard therefore requires a separate graphics card, or a processor that has a GPU on the same die, such as AMD APU processors. There are 2 PCIe x16 slots on this motherboard. This means it is perfectly capable of accommodating the latest graphics cards, although it is important to try and use a graphics card with the same graphics card interface of PCIe v3.0, as anything below will not reach the motherboard's potential, and anything above will have its performance slashed to the bandwidth maximum of the ASRock Fatal1ty B250M Performance's PCIe v3.0. The ASRock Fatal1ty B250M Performance does not support multiple graphics cards via Nvidia SLI or AMD Crossfire.
The ASRock Fatal1ty B250M Performance has 4 USB 2.0 slots and 5 USB 3.0 slots. USB 3.0 slots are theoretically capable of data transfer speeds of up to 5 Gbit/s, which is over 10 times faster than the USB 2.0 top speed of 480 Mbit/s. Although USB 2.0 slots alone currently serve as well as ever, an upgrade would better future-proof your system as more USB 3.0 compatible peripherals emerge. USB 3.0 is also backwards compatible with USB 2.0, which means you do not even have to use the newer slot functionality if you do not wish to.