Loading build...
Loading...
Your Shops

ASRock

ASRock B360M Pro4

The ASRock B360M Pro4 is compatible with Intel processors with the LGA 1151 socket.

It has 64 GB DDR4 maximum RAM and conforms to the Micro-ATX form factor standard.

4.2

ASRock B360M Pro4

help iconCPU SocketLGA 1151help iconSLI Support1 graphics cards
help iconCPU Compatible MakeIntelhelp iconCrossfire Support2 graphics cards
help iconCPU ChipsetIntel® B360help iconOnboard GPUno
help iconForm FactorMicro-ATXhelp iconPCI Slots
  • 2 x PCIe x1 v3.0
  • 2 x PCIe x16 v3.0
help iconMax RAM64 GB DDR4help iconSATA 1.00
help iconRAM Slots4 x DDR4help iconSATA 2.00
help iconMemory Channels2help iconSATA 3.00
help iconCompatible RAM Speeds
  • DDR4 2133 MHz
  • DDR4 2400 MHz
  • DDR4 2666 MHz
help iconRAID Supportno
help iconUSB 2.0 Internal Slots2help iconInternal I/O
  • 1 x 24 pin power connector
  • 1 x 8 pin power connector
  • 1 x 4 pin fan connector
  • 1 x fan header
  • TPM Chip
help iconUSB 2.0 Rear2help iconBack Panel I/O
  • D-Sub Connector
  • DVI connector"
  • Line In Connector
  • Mic In connector
  • Audio Input Output
  • PS/2 keyboard connector
  • PS/2 mouse connector
help iconGraphics Card InterfacePCIe v3.0

ASRock B360M Pro4 compatibility review

The ASRock B360M Pro4 uses the Intel LGA 1151 CPU socket. Any compatible Intel CPU will have the same socket entry. It uses the DDR4 memory type, with maximum speeds of up to 2666 MHz, and 0 DDR4 slots allowing for a maximum total of 64 GB RAM.

The Micro-ATX ASRock B360M Pro4 should fit into all ATX cases, but its smaller size allows you to downsize your system build as a whole. Its size comes at the cost of features, so there are likely to be far fewer connections and expansion options available than in a larger motherboard.

The ASRock B360M Pro4 has 6 SATA 3.0 hard drive slots. These allow for theoretical data transfer speeds of up to 6GB/s, as opposed to the 3GB/s of SATA 2.0. Generally speaking, only high performance hard drives, specifically solid-state drives, will be able to take advantage of the bandwidth potential of SATA 3.0 ports, though it is backwards compatible, so you do not have to take advantage.

The ASRock B360M Pro4 does not support onboard graphics. Any system build that uses this motherboard therefore requires a separate graphics card, or a processor that has a GPU on the same die, such as AMD APU processors. There are 2 PCIe x16 slots on this motherboard. This means it is perfectly capable of accommodating the latest graphics cards, although it is important to try and use a graphics card with the same graphics card interface of PCIe v3.0, as anything below will not reach the motherboard's potential, and anything above will have its performance slashed to the bandwidth maximum of the ASRock B360M Pro4's PCIe v3.0. The ASRock B360M Pro4 supports up to 2 AMD Crossfire connected graphics cards for improved overall graphical performance at the cost of multiplied graphics-based power consumption as well as the price of the cards themselves. Nvidia SLI is not supported.

The ASRock B360M Pro4 has 4 USB 2.0 slots but no USB 3.0 slots. While USB 3.0 slots are so far by no means necessary, and with a plethora of USB 2.0 peripherals to choose from, the USB functionality on this motherboard should be fine. With so few slots, however, you would have to use a USB expansion hub. As such, we would highly recommend a different motherboard, preferably with USB 3.0 functionality as well.

Merchant Comparison
Merchant Price
- -
Custom PC Builder Auto PC Builder Compare Mobo All Motherboard list
Best Compatible Hardware by Price
Type :
$ $

Similar Motherboards to ASRock B360M Pro4