The DIYPC Gamemax BK conforms to the ATX form factor and so can accommodate motherboards with form factors ATX and Micro-ATX.
Its dimensions (LxWxH) are 20mm x 9mm x 21mm.
|Form Factor||ATX||Maximum Graphics Card Length||392mm|
|Motherboard Form Factors||Front Fans||2|
|Material||Not sure||Front Fans Size||120mm|
|Expansion Slots||7||Top Fans Size||120mm|
|5.25″ Drive Bays||1||Rear Fans||1|
|3.5″ Drive Bays||4||Rear Fans Size||120mm|
|2.5" Drive Bays||5||IO Display Panel||no|
|Tool-less Rails||yes||Front USB 2.0 Slots||2|
|Length||20mm||Front USB 3.0 Slots||2|
The DIYPC Gamemax BK has a the ATX form factor. ATX is the most ubiquitous of case standards, providing the largest array of compatible hardware on the market. Using the ATX standard, the case can house motherboards and power supplies with form factors ATX and Micro-ATX. The dimensions of the case itself (LxWxH) are 20mm x 9mm x 21mm.
The DIYPC Gamemax BK has seven expansion slots, so there is plenty of room for extra components, which may be a deciding factor when planning on the longevity and build type of a PC system. The case has one 5.25" drive bays, which is enough room for an optical drive but little else, and with just one 3.5" drive bay, there is basically no room at all for expansion. With five 2.5" bays, however, there is enough room for a laptop-sized HDD or solid-state drive. Installation of hard drives into these drive bays is made all the more easier by screwless rails that allow tool-less mounting.