The Antec P182 SE conforms to the ATX form factor and so can accommodate motherboards with form factors ATX, Micro-ATX and Mini-ITX.
It is made of Steel and its dimensions (LxWxH) are 510mm x 211mm x 520mm.
|Form Factor||ATX||Maximum Graphics Card Length||394mm|
|Motherboard Form Factors||Top Fans||1|
|Material||Steel||Top Fans Size||120mm|
|Color||Not sure||Rear Fans||1|
|Expansion Slots||7||Rear Fans Size||120mm|
|5.25″ Drive Bays||4||Bottom Fans||1|
|3.5″ Drive Bays||1||Bottom Fans Size||120mm|
|2.5" Drive Bays||0||IO Display Panel||no|
|Tool-less Rails||no||Front USB 2.0 Slots||2|
|Length||510mm||Front USB 3.0 Slots||0|
The Antec P182 SE has a the ATX form factor. ATX is the most ubiquitous of case standards, providing the largest array of compatible hardware on the market. Using the ATX standard, the case can house motherboards and power supplies with form factors ATX, Micro-ATX and Mini-ITX. The dimensions of the case itself (LxWxH) are 510mm x 211mm x 520mm.
The Antec P182 SE has seven expansion slots, so there is plenty of room for extra components, which may be a deciding factor when planning on the longevity and build type of a PC system. The case has four 5.25" drive bays, which is enough to house an optical drive and a couple of hard drives, but with just one 3.5" drive bay there is not much extra drive space available. What's more, there are no 2.5" drive bays, so mounting an SSD would require using an adapter and filling one of the few drive bays available.
Made primarily of Steel, the Antec P182 SE is built to be strong and well-ventilated. Steel cases are generally fairly cheap and sturdy, but also tend to be quite heavy. Whatever your case's material, it is important to keep a consistent airflow so that heat doesn't build up inside. It is therefore advised that you make use of the available built-in case fans and fan installation sections.