The Aerocool X-Warrior Devil Red Edition conforms to the ATX form factor and so can accommodate motherboards with form factors ATX and Micro-ATX.
It is made of Plastic and its dimensions (LxWxH) are 520mm x 187mm x 488mm.
![]() | Release Date | 10 Jun 2011 | ![]() | Maximum CPU Cooler Size | 163mm | ||
---|---|---|---|---|---|---|---|
![]() | Form Factor | ATX | ![]() | Front Fans | 2 | ||
![]() | Motherboard Form Factors |
| ![]() | Front Fans Size | 120mm | ||
![]() | Material | Plastic | ![]() | Side Fans | 2 | ||
![]() | Color | Black | ![]() | Side Fans Size | 120mm | ||
![]() | Expansion Slots | 7 | ![]() | Rear Fans | 1 | ||
![]() | 5.25″ Drive Bays | 3 | ![]() | Rear Fans Size | 120mm | ||
![]() | 3.5″ Drive Bays | 4 | ![]() | Case Fan dBA | 27 dBA | ||
![]() | 2.5" Drive Bays | 1 | ![]() | IO Display Panel | yes | ||
![]() | Tool-less Rails | yes | ![]() | Front USB 2.0 Slots | 2 | ||
![]() | Length | 520mm | ![]() | Front USB 3.0 Slots | 0 | ||
![]() | Width | 187mm | ![]() | eSATA | no | ||
![]() | Height | 488mm | ![]() | Audio IO | yes |
The Aerocool X-Warrior Devil Red Edition has a the ATX form factor. ATX is the most ubiquitous of case standards, providing the largest array of compatible hardware on the market. Using the ATX standard, the case can house motherboards and power supplies with form factors ATX and Micro-ATX. The dimensions of the case itself (LxWxH) are 520mm x 187mm x 488mm.
The Aerocool X-Warrior Devil Red Edition has seven expansion slots, so there is plenty of room for extra components, which may be a deciding factor when planning on the longevity and build type of a PC system. The case has three 5.25" drive bays, which is enough to house an optical drive and a couple of hard drives, while still having a couple of extra free hard drives with the four 3.5" drive bays that are also available. In addition, you can mount an SSD without having to use an adapter, as the Aerocool X-Warrior Devil Red Edition has one 2.5" drive bay. Installation of hard drives into these drive bays is made all the more easier by screwless rails that allow tool-less mounting.
Made primarily of Plastic, the Aerocool X-Warrior Devil Red Edition is built to be lightweight, but strong enough to keep your components protected. Plastic cases generally have a thin metal layer to improve protection, and are also generally fairily cheap. Whatever your case's material, it is important to keep a consistent airflow so that heat doesn't build up inside. It is therefore advised that you make use of the available built-in case fans and fan installation sections.